User's Manual

5.8 Selective Call (Paging)

In Selective Call mode (Paging mode), the user can call individuals and groups through the 5-tone ID. Each

Selective Call memory (paging memory) stores up to 30 IDs and names. The user should set the paging memory

and the 5-tone environment in the PC program. To enter into Selective Call (Paging mode), press “Menu” and

“M” button , and to go back to Normal mode, press “Menu” button for two seconds in Selective Call (Paging

mode). By pressing Channel buttons (▲ and ▼) in Selective mode (Paging mode), the user can view the number

of the currently available channel.

Figure 5.6 Normal Mode Figure 5.7 Paging Mode

One-to-one (1:1) Selective Call Mode (Paging Mode)

① Enter into Selective Call (Paging mode) by pressing press “Menu” and “M” button for a while in Normal

mode.

② Select the other person’s tone number by pressing Channel buttons (▲ and ▼). For example, if TOMMY

wants to call JOHN, TOMMY needs to select JOHN’s tone number by pressing Channel buttons (▲ and ▼)

in Selective Call Mode (JOHN’s tone number : 12345, TOMMY’s tone number : 54321).

③ And then if TOMMY presses “Menu” button , JOHN will be called. At the same time, on John’s radio, his

number will be displayed. Although John’s radio is in Normal mode, it will enter into paging mode

automatically as soon as a call arrives.

Figure 5.8 TOMMY Calling JOHN Figure 5.9 JHON Receiving the Call

2) One-to-one (1:1) Calling in Selective Call Model (Paging Mode)

① After entering into Selective Call (Paging mode), select the other person’s name to call by pressing Channel

buttons (▲ and ▼).

② Press transmission PTT button to send the other person’s ID first.