User's Manual

④ Exit Menu mode by pressing “M”s button. Select “Off”. Then, the bell symbol will disappear on the LCD.

5.15 Scan

Scan is to search channels registered in the scan list and let the radio select the channel automatically in which a

signal is received. To use Scan menu, the user first needs to set the scanning feature for the corresponding channel

in the PC program:

① Enter into Menu mode.

② Select “Scan” by pressing Channel buttons (▲ and ▼) and press “Menu” button. Then, the scan list and

Priority Channel message will be displayed.

③ Select the scan list by pressing Channel buttons (▲ and ▼) and “Menu” button. After the user selects the

scan list, all channels of the communication groups will be displayed.

④ In default, “O” (Scan) is set in all channels. By pressing “M”, the user can delete a channel from the scan list,

and in this case, “No” will be changed into “/”.

⑤ After setting a scan list, press “M”. Then, the scan list and Prior Channel message will be displayed.

⑥ Select a priority channel by pressing Channel buttons (▲ and ▼) and press “Menu” button. The user can

select two higher channels as priority channels. After “P - CH” is displayed, press “Menu” button. Select a

channel by pressing Channel buttons and press “Menu” button. Then, “P1” will be displayed next to the

corresponding button. Or to delete the channel, press “Menu” again. Then, “P1” will disappear.

⑦ Select a channel in the same way as Priority Channel 1. After selecting the priority channel, press “PTT”

button. Then, “P2” will be displayed. Exit the menu mode by pressing “M” button.

(PTT = > P2)

Blank

Yes/Priority Scan

No/Normal Scan

Menu => P1

if P1 then

PTT press

if P2 then

Menu press

Figure 5.16 SET SCAN