User's Manual

15
5.8 Compander Function
This function is for improving the quality of voice. When transmitting, it transmits
compressed voice and when receiving, it expands the compressed voice, which is
for improvement of communication quality.
*
Selection Method of Compander
If turning on power during the PTT + MENU (Scan) key, the conversion sound of Compander
Mode is generated and from that time, the Compander function operates. Although the
power is turned off and on, the Compander function is maintained.
To release from the Compander function, turn on power during pressing the
PTT + MENU (Scan) key once again.
Indication Method : If the Compander function is already set up when turning on power, the
green LED is turned on with a sound and after the sound, the green LED
is turned off. (If the Scramble function is also set up, the yellow LED
lights with a sound and after the sound, the yellow LED is turned off.)
5.9 Cloning Function
The Cloning function is to copy the data such as Frequency/Tone/Scan into other Radio.
* Cloning Method
1) First, prepare the Cloning cable (PECLONA) for PX-Series Radio.
2) The original Radio should be turned on with pressing the PTT button and the Radio to
be copied should be in the Standby mode for receiving.
3) The yellow LED of original Radio is turned on.
4) Connect the Cloning cable to the Ear/Mic. Jacks of 2 Radios.
5) If pressing the “Menu(Scan)" button of the original Radio, the copy is executed and
after completing the copy, the green LED of original Radio lights and if the copy is
failed, the red LED is turned on.
6) After removing the Cloning cable, turn off and on the power of 2 Radios.
Finally please use the Radio after checking if the copy is succeeded without problem.
☞Caution : If the Cloning is made into other maker’s Radio, a critical malfunction can
happen.