User's Manual

16
5.10 Indication Function of Batter Voltage
In order to check the remaining battery capacity, press the MENU (Scan) + MON key
successively at Normal Mode. Then, the LEDs show the followings for 1 second and return
back to the original.
-. Green LED is turned on. : satisfaction
-. Yellow LED is turned on. : sufficiency
-. Red LED is turned on. : Shortage
-. Red LED blinks with an alert sound. : Turn-off
5.11 Stun / Revive Function
By using this function, it is possible to stun and revive the Radio with Stun ID from the control
center which is far apart from the Radio. If Radio receives a Stun ID from the other Radio, the
Radio with the Stun ID received lights the green LED and the red LED in turn.
In this state, no key operates. (However, if pressing the PTT key, an alert sound
is generated.)
And although the power is turned off and on, this function is maintained.
If Radio receives Revive ID from the other Radio, the Radio returns back to the original
with a ”beep” sound.
5.12 Dual PTT (Home Channel) Function
If pressing the EMR + PTT key successively, the Radio generates a “beep” sound and makes
the conversion to the channel designated by PC Program. If Dual PTT function is set up, the
function and channel sound of the current channel selection switch are deleted and the Radio
is operated by the Dual PTT only.
In order to release from the function, press the EMR + PTT key once again, or turn off and on
the power.
-. This function is not operated at the Scan Mode.
5.13 Emergency Call Function
If pressing the EMR key, emergency alert sound is heard and the Radio sends the emergency
call to the current channel or Home-Channel.
If the Radio is set up in repeat mode, the emergency call sound is heard periodically.
-. This function is not operated at the Scan Mode.