User's Manual
Table Of Contents
- Specifications
- model number
- PZ-S series radio Package numbers
- FEATURES
- Controls & Indicators
- BATTERY PACKS
- Charger
- Radio OPERATIons
Maintenance Manual
24
Squelch Level
The user can be set the 9 different squelch levels on the radio. It can be changed on the PC programmer or
press the pre-assigned button.
Cloning
The personality data of radio such as frequency/Tone/Scan can be copied to other radio directly using by
cloning function. The following section provides a description of 2 different kind of cloning function.
Wire Cloning
Prepare the cloning cable (PECLONA) for PZ-S series radio.
The originated radio should be turned on with pressing the PTT button and the radio to be copied
should be in the standby mode for receiving.
The yellow LED is turned ON of the originated Radio.
Ear/Microphone jack of originated radio connect to the target radio through cloning cable.
If pressing the pre-assigned button of the originated radio, the copy is executed. After completing
the copy, the green LED is turned ON. In case of failed then the red LED is turned OFF.
Remove the cloning cable from these two radios.
Turn off radio and re-power of two Radios.
Please use the radio after checking if the copy is succeeded without problem.
☞
CAUTION`
If the Cloning is made into other maker’s Radio, a critical malfunction can happen.