Quick Guide

- Performance compromise or troublesoccurring after the warranty period
- Troubles of damage due to user’smishandling the device
- Troubles caused by natural disasters
- Troubles caused by user’s mistake
(For example, not following instructionsand safety notes in the manual)
- Trouble caused by user’s failure to usethe recommended power source
- Troubles caused by repairing orremodeling by the user or unqualifiedperson, not the
service personnel ofUNIMO Technology
FCCComplianceNotice
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1) Thisdevicemaynotcauseharmfulinterference,and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Anychangesor modifications not expressly approvedby thepartyresponsible for compliance could void
theuser'sauthoritytooperatetheequipment.
Thisequipmenthasbeen testedandfoundtocomplywiththelimitsfora ClassBdigitaldevice,pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, usesand can radiate radio frequency
energyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterference
toradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular
installation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcan
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna.
Increasetheseparationbetweentheequipmentandreceiver.
Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
RFExposureInformation
This equipment complies with FCC radiation exposure limits set forth for an controlled environment .
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For face-up,25mm was used for test, this equipment should be installed and operated with minimum
distance 25mm.
For body worn operation, this device has been tested and meets the FCC RF exposure
guidelines when used with an accessory designated for this product or when used with an accessory that
Contains no metal .
Non-compliance with the above restrictions may result in violation of RF exposure guidelines.
This radio complies with IEEE and ICNIRP exposure limits for occupational/controlled RF exposure
environment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only.