PTL Base Station Product Manual
Contents 1) Summary..................................................................................................................1 1.1 Product Introduction...........................................................................................1 1.2 Dimensions and Weight......................................................................................1 1.3 Unpacking and checking....................................................................................1 1.4 Features and Usage.............
1. Contents 1.1 Product Introduction Base Station is the third-generation wireless base station. It is a new Active RFID system and the new ESL Tags. Century produces the base station for its electronic shelf label system (ESLs) and other products. 1.2 Dimensions and Weight Dimensions:140mm x 42mm Weight: 250g (approx) 1.3 Unpacking and Checking In order to facilitate future storage and transportation, please keep the carton and packing materials after opening them.
1.5 Environmental Requirements Temperature Range: -10°C to +55°C(14°F to +131°F)Humidity range: 20% to 95%Supply Voltage: AC/DC Adapter. Base Station Input Voltage 6VDC, 2.3A 1.6 Electronic Shelf Label System Overview An electronic shelf label system (ESLs) consists of electronic shelf labels, ESL server, switches, base stations, Handset and software.
2. Technical Characteristics 2.1 Key Performance Areas Uses 2.4GHz frequency within ISM band, worldwide compatibilityGreenTags proprietary wireless protocol to ensure data securitySupports Power over Ethernet ability to cascade Base Stations to reduce installation complexity and cost. (1) Electrical Characteristics Parameter Power Supply DC6V, 2.3A Supports 802.
3. Base Station Installation 3.
3.
3.3 Installation Conditions Before Installation Check that the product is intact and all attachements arecomplete, if there is damage or missing parts please contact Century promptly. Check whether the following installation conditions exist before continuing: A) Installation will meet applicable workplace standards. B) Complete the required Installation processes. 3.
Figure 3-1 Base Station Arrangement The Frame is the building outline, the view is from the top down with the viewof all the Black dots (which are Base Stations) on the ceiling of the building; The Round dotted line circles are the Base Station signal coverage areas, typical coverage depending on the environment is between 15m to 50m in a simple open environment for a single Base Station.
4. Troubleshooting Symptom Power LED Does not light Network Communication not normal Cause Troubleshooting Comment Check Mains socket has power and is on, replace adapter if it does Power Adapter may not work Interface Cable not Reconnect cable or replaceif this still connectedor no response has problem Base StationIP configuration Problem may exist Use the ESL Startup softwareto configure Base Station IP Address 5. Warranty Thank you for purchasing Century product.
Disclaimer: This manual belongs to Hangzhou Century Co.,Ltd (hereinafter referred to as "Century"), it cannot be reproduced in part or whole without the express permission of Century. Parties that do reproduce in part, or whole, this document risk legal action.
BASE STATION
