Product Manual

6
Figure 3-1 Base Station
Figure 3-2 Fitting
As figure 3-2
show，when you
want to put the
Cable out,you can
use the fitting.
Arrangement
3.3 Installation Conditions
Before Installation Check that the product is intact and all attachements
arecomplete, if there is damage or missing parts please contact Century promptly.
Check whether the following installation conditions exist before continuing:
A) Installation will meet applicable workplace standards.
B) Complete the required Installation processes.
3.4 Installation Location
The choice of Base Station position depends on its installation, it should bewhere
possible, in a place free of obstacles that is safe and easy to operate.
The Base Station can be mounted on the ceiling and or wallsdepending on
3.5 Installation Method
Before Installation: Configure all Base Station IP Addresses (refer software
manual for instructions for this step).
Installation: the Base Station secures with Phillips pan head self-tapping screws
connect power cable and Network cable. Typical installation Figures 3-1 and 3-3