Product Manual

7
Figure 3-1 Base Station Arrangement
The Frame is the building outline, the view is from the top down with the
viewof all the Black dots (which are Base Stations) on the ceiling of the building;
The Round dotted line circles are the Base Station signal coverage areas, typical
coverage depending on the environment is between 15m to 50m in a simple open
environment for a single Base Station.
(2) Ensure that equipment is grounded.
(3) Check the Base Station and antenna installation position and orientationwith
respect to the ESL that will be exchanging data.
(4) This product radiates Radio Frequency (RF) energy, the installation
andcommissioning personnel should leave
at least 30cm between themselves and
theantenna in order to meet the FCC requirements for human exposure.
(5) Any radio transmitting equipment, inlcuding this Base Station, can
beinterfered with by medical
devices without proper protection. If there are
problemsseek the medical device manufacturer for advice.
(6) This equipment may cause interference with other electronic devices.
≤20 m
Figure 3-3 Base Station Installation Distance
Figure 3-3 shows the inter Base Station installation distance, the dotted line
represents the Base Station wireless signal coverage area;
Ensure the distance betwen base stations is less than or equal to 20m.
3.6 Precautions
1) The PTL Base Station power supply shipped has an input range of 100V to
240Vac 360mA please ensure it is able to be supplied with the correct voltage.