Specifications

With more ways
to optimize
data center
infrastructure to
reduce design,
management
and energy
costs while
maintaining
high availability
and flexibility,
Emerson Network
Power delivers...
Efficiency
Without
Compromise
Increase Availability
Reduce Energy
Improve Performance
Increase Control
Shorten Time
Minimize Space
Management
& Planning
Operation
Design &
Deployment
Management Tools & Technologies
Economization
Intelligent Aisle Containment
Variable Capacity
Integration & Operation Services
Critical Services
Power Architecture
Intelligent Control
IT, rack, row and room sensor networks provide
management and control of temp, humidity,
pressure, power, water detection, capacity,
and battery health.
Centralized real-time monitoring reduces
downtime and management.
Fluid economizers enable “free cooling”
while controlling temperature, humidity, and
preventing contamination.
Liebert Glycool safely uses outside temperatures
to reduce cooling system compressor runtime,
saving up to 25% of energy cost.
SmartAisle by Emerson Network Power
eliminates temperature stratification and
excess airflow at IT equipment source.
Easily retrofitted with existing cooling
infrastructure for up to 30% efficiency and
up to 25% capacity improvements.
Liebert DS is the only data center cooling
system to use variable capacity Digital Scroll
compressors.
Variable capacity compressors reduce energy
consumption by up to 30% on an air cooled
system, saving up to $5,000/yr/unit.
Implementation and commissioning services
ensure rapid deployment.
Enterprise remote monitoring enables proactive
management.
Standards-based interface with Building Management
System bridges IT and facility management.
Preventive maintenance optimizes
the lifetime value of equipment.
Facility Power Audits maximize efficiency
and availability.
Battery monitoring and service maximizes
performance, life, and availability.
Liebert and Knurr rack PDUs are available
in configurations up to 60 amp, with
an industry-leading standard operating
temperature of up to 131°F, for reliable
support of high density racks.
Standard TP-1 transformers in PDUs provide
up to 98.7% efficiency.
Liebert iCOM with predictive control and
teamwork saves up to 7% energy consumption
over traditional controls.
Manages “zones” including non-homogeneous
heat loads, contained areas, and localized
high density areas for optimized cooling
performance.
9