User's Manual

AC-2000 User Guide 18
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.3. Terminal Configuration
3.3.1. Settings via UNIS-B Plus
When pressing [Setting] button in the lower right corner of screen, the following
screen will appear.
To modify the existing Terminal setting, press [Edit] button in the upper-right corner of
screen to enter the edit mode. When the modification of terminal setting is completed,
press the [Save] button to save changed values and return to the main screen.
▶ Buzzer volume
Set the buzzer sound volume of the terminal.
▶ Lock Controller
485 controllers can be selected.
If you select MCP040, MCP040 will perform authentication, lock control, and
log processing.
▶ Card Format
If set to Hexa, hexadecimal is displayed. When set to Decimal, it is displayed in decimal.
If you select [4. Format 5] with the installed RF (low frequency) card reader, the
authenticity of the EM card is displayed in decimal notation.
▶ 1: N Level
Set the verification level from 5 to 9 when 1: N authentication is in progress.
▶ 1: 1 Level
Set the verification level from 1 to 9 when 1: N authentication is in progress.