User's Manual

AC-2000 User Guide 7
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
1.4. Buzzer guide announced during operation
Ppik
When button
or card is
operated
- If the button is pressed or if the terminal reads the card
- If your finger may be released because your fingerprint
has been successfully entered
Ppibik
When failure
If authentication fails or the user’s input is wrong
Ppiririk
When success
If authentication is successful or if the current user finishes
settings
1.5. How to register and enter correct fingerprint
 Correct fingerprint input method
Enter your fingerprint as if you take a thumbprint by using your forefinger if
possible.
The fingerprint cannot be correctly registered and entered only by your fingertips.
The center of the fingerprint should be touched with the fingerprint input section.
 Enter the fingerprint of your forefinger if possible.
When using your forefinger, you can enter your fingerprint correctly and safely.
 Make sure that the fingerprint is unclear or wounded.
Too dry, wet, blurry or wounded fingerprints are difficult to recognize. In this case,
the fingerprint of another finger should be registered.