User's Manual

AC-2100 Plus 사용자 가이드 26
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.3.1.1. Register as “1. FP”
Register and authenticate using the fingerprint.
Default Setting: ‘0’
This screen is available to determine the authentication level for each user to be registered. By
changing this value, the different authentication level may be set for each registered user.
If this value is set to ‘0’, the 1:1 Level set in the terminal is used instead of the user-specific
authentication level.
After completion of setting, press the [ENT] button to move to the next setting.
Enter your fingerprint referring to “1.8. How to register
and enter the fingerprint” as aforesaid.
When the fingerprint sensor lights on, place your finger on the fingerprint input window. When
“Ppik” buzzer occurs, wait for about 2~3 seconds until the light turns off, and lift your finger.
When the first fingerprint is successfully entered, the message of “Please try again” is displayed.
Enter the fingerprint entered just now once again.
Enter the fingerprint entered just now once again.