User's Manual

AC-2100 Plus 사용자 가이드 28
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.3.1.4. Register with “FP and Card”
The user can be registered using card and fingerprint. Authentication is performed for the card
and then for the fingerprint.
The user should register his/her fingerprint (see Fingerprint Registration) and then his/her card
(see Card Registration).
3.3.2. Delete User
Select [F3~]→[1.User]→[2.Delete] on the main screen, and the following screen will appear.
Enter the ID of the new user you wish to delete, and press
[F4] button long.
Enter the ID of the user you want to delete from the registered users of the terminal and press
[F4] button long, the successful buzzer will sound and all the information will be deleted from
the terminal. However, data deletion from the terminal does not mean data deletion from the
server. To delete the data permanently, it must be deleted from the server as well.
If the ID of an unregistered user is entered, the message of “Unregister” with “Fail” buzzer is
displayed on the LCD and then the screen goes to the “1. User” menu.
When deleting, both general users and administrators are deleted without distinction. So you
have to watch out the deletion of administrator unknowingly.
If users who are not exist in the network server but registered in the terminal are deleted, the
data cannot be recovered. Therefore, special cautions are required.