User's Manual

AC-2100 Plus 사용자 가이드 29
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.3.3. Modify User
Select [F3~]→[1.User]→[3.Modify] on the main screen, and the following screen will appear.
Enter the ID of the user you wish to change, and press
[ENT] button long.
Both general users and administrators can be changed without distinction. If the ID of an
unregistered user (or administrator) is entered, the message of “Unregister” with “Fail” buzzer is
displayed on the LCD and then the screen goes to the “1. User” menu.
The changeable items of users are different according to the user authentication method and are
classified as below.
Select [1] to change the authentication method; [2] to
modify the authentication level; [3] to add the fingerprint
to the relevant ID; and [4] to add the card.
※Up to 10 fingerprints/cards per ID can be registered. If you try to register more than 10
fingerprints/cards, when selecting [3] or [4], “Fail” buzzer occurs and the message of “User
FP/Card Full !” is displayed on the LCD.
[1] When selecting “Auth Type”
By using [↑][↓] buttons, select the authentication method
and “And” or “Or”, and press “Next” button.