User's Manual

AC-2100 Plus 사용자 가이드 30
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
To modify, select the authentication methods referring to the aforementioned process of [3.3.1.1]
to [3.3.1.4].
[2] When selecting “1:1 Level”
Recommended Setting: ‘0’
To modify, the new set value should be entered.
If this value is set to ‘0’, the 1:1 Level set in the terminal is used instead of the user-specific
authentication level.
[3] When selecting “Add FP”
Enter your fingerprint referring to “1.8. How to register
and enter the fingerprint” as aforesaid.
When the fingerprint sensor lights on, place your finger on the fingerprint input window. When
“Ppik” buzzer occurs, wait for about 2~3 seconds until the light turns off, and lift your finger.
When the first fingerprint is successfully entered, the message of “Please try again” is displayed.
Enter the fingerprint entered just now once again.
Enter the fingerprint entered just now once again.
It should be noted that when entering the second fingerprint after entering the first fingerprint,
you must release your finger from the fingerprint input window and then enter the second