User's Manual

AC-2100 Plus 사용자 가이드 37
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.4.3.1. Connection Method Setting
Select [1] if Static IP is assigned, and select [2] to set IP
using DDNS.
Default Setting: ‘1.Static’
This is the way that the terminal is connected to the network.
Select [1] when using the Static IP assigned from the connected network, and select [2] when
using the IP assigned from the DDNS server.
After entering correctly, press [ENT] button to move to the next setting.
※ If the connection method is set to ‘Static IP (1)’, the following procedures such as “3.4.3.2.
Sever IP Setting” and “3.4.3.3. Server Port Setting” should be set respectively. However, if
the connection method is set to ‘2. DDNS’, DDNS ID needs to be additionally set and so
“4.4.3.4. DDNS ID Setting” is added.
3.4.3.2. Sever IP Setting
Press [←][→] buttons to move to the digit you want to
change, and press [↑][↓] buttons to change the numbers.
Default Setting: “192.168.000.002”
This is to specify the IP Address of the network server connected to the terminal.
After entering correctly, press [F4] button long to move to the next setting.