User's Manual

AC-2100 Plus 사용자 가이드 42
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
Default: ‘1.No’
This is the menu to select whether to use the printer or not. If the authentication is set
to ‘1’ or ‘2’ with successful authentication, the Terminal ID, User ID, Date and
Authentication mode are printed out through the printer connected to the RS232 port of
Terminal. The printer used is “SRP-350” Serial Type model.
Subsequently, press [ENT] button, and the following screen will appear.
Default Setting: All ‘V’
Set whether to use each function key. When setting to ‘V’, it means that the authentication mode
may be changed when pressing the function key. When setting to Blank, the authentication mode
is not changed in spite of pressing the key. When this mode is used only for Attend or Leave, it is
available by unchecking other function keys.
After selecting the set value, press [ENT] button, and all authentication settings will be finished
and the screen will move to the upper menu.