User's Manual

AC-2100 Plus 사용자 가이드 44
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
When <Snack> is set, the menu to check whether to duplicate appears as shown below.
Default Setting: ‘2.No’
If the mode is set to ‘No’, authentication is once allowed within the same meal time zone.
When attempting authentication again, the “Duplicated!” message is displayed and the
authentication fails.
Subsequently, press [ENT] button, and the following screen will appear.
Default: ‘1.No’
This is the menu to select whether to use the printer or not. If the authentication is set
to ‘1’ or ‘2’ with successful authentication, the Terminal ID, User ID, Date and
Authentication mode are printed out through the printer connected to the RS232 port of
Terminal. The printer used is “SRP-350” Serial Type model.
Subsequently, press [ENT] button, and the following screen will appear.
Default Setting: All ‘V’