User's Manual

AC-2100 Plus 사용자 가이드 45
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
Set whether to use each function key. When setting to ‘V’, it means that the authentication mode
may be changed when pressing the function key. When setting to Blank, the authentication mode
is not changed in spite of pressing the key. When this mode is used only for Attend or Leave, it is
available by unchecking other function keys.
After selecting the set value, press [ENT] button, and all authentication settings will be finished
and the screen will move to the upper menu.
3.5.2. Authentication Method Setting
Select [F3~] → [3.Option] → [2. Verify] on the main screen, and the following screen will
appear.
3.5.2.1. Set whether to display ID upon successful authentication
Default Setting: ‘2.User Name’
- ‘1’: displays the authenticated user ID
- ‘2’: displays the user name on the LCD. If there is no user name, the user ID is displayed.
But it marks Max 16 letters for English, Max 8 letters for Korean (Japanese/Chinese)
- ‘3’: displays the User Key which is registered upon user registration.
- ‘4’: displays the message entered upon user registration. But it marks Max 16 letters for
English, Max 8 letters for Korean (Japanese/Chinese)
(Caution)
* UserName and Message are set in the server. For output, the user information must be
downloaded.
* UserName and Message must be set to the same language as the terminal language.
(Example) OK!<0001>
Subsequently, press [ENT] button to move to the next setting.