User's Manual

AC-2100 Plus 사용자 가이드 59
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.8. Device Setting
Select [6.Device] on the main menu, and the following screen will appear.
Press [↑][↓] buttons to select the menu you want to
change, and press [ENT] button.
Most of device settings are the option that does not need to change after installation. It is
recommended that they are not changed unless there is any clear purpose.
3.8.1. System Configuration
Select [F3~] → [6.Device] → [1. System Conf] on the main screen, and the following screen will
appear.
3.8.1.1. User ID Digit Setting
Default Setting: ‘4’
This is a portion for setting the length of user ID. The length of user ID can be set to the 2~8
digit. It should be equal to the length of ID registered in the server program. If the 6-digit ID of
‘000075' is registered in the server program, the mode is set to ‘6’.
After setting, press [ENT] button to move to the upper menu.