User's Manual

AC-2100 Plus 사용자 가이드 64
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
Default Setting: ‘2.No’
This option is available when the Wiegand card reader is used.
When the mode is set to [1], the card information entering to ‘Wiegand In’ is bypassed to
‘Wiegand Out’.
3.8.5. Terminal Initialization
Select [F3~] → [6.Device] → [5.Initialize] on the main screen, and the following screen will
appear.
Select [1] to initialize the set value; [2] to initialize the
authentication records; [3] to initialize the factory; and [4]
to use the UDL10 to backup the DB.
3.8.5.1. Set Value Initialization
Select [1] to initialize, and [2] to cancel.
This option initializes all settings of the terminal except for the MAC (physical) addresses and
serial numbers saved in the terminal. But, users and authentication records are not deleted.
When initialization is successfully completed, the “Ppiririck” beep occurs and the screen moves
to the upper menu.