User's Manual

AC-2100 Plus 사용자 가이드 66
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
DB Backup Menu.
 Export Log
- Used when the log data saved in the AC2100 terminal is exported to USB.
- Data is saved with a file name of LOG.DAT in the place of “USB top-level folder →
AC2100 folder → 00000000 (8-digit terminal ID) folder → LOG folder”.
- Only log data can be saved, except for photos.
 Export User
- Used when the user data saved in the AC2100 terminal is exported to USB.
- Data is saved with a file name of USER.DAT in the unisuser folder.
- The number of exported users can be checked on the LCD.
 Import User
- Used when the user data (USER.DAT) saved in USB is imported into the terminal.
- The user file (USER.DAT) must be saved with a file name of USER.DAT in the unisuser
folder.
- The size of imported data can be checked on the LCD.
 Upgrade
- Used when upgrading the terminal firmware by using the firmware data (ac2100.bin)
saved in the USB.
- The firmware file is ‘ac2100.bin’. To upgrade, it must be saved with a file name of
ac2100.bin in the AC2100 folder.
- The size of imported data can be checked on the LCD.
Caution!!
When removing the USB or powering off the terminal during upgrading, the product may not
work properly. Special caution is required.
3.8.6. External Device Setting
Select [F3~] → [6.Device] → [6.Ext Device] on the main screen, and the following screen will
appear.