User's Manual

AC-2100 Plus 사용자 가이드 72
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
When the lamp is on the fingerprint input window with the voice
message of “Please enter your fingerprint”, enter your fingerprint
and keep your finger until the “beep” sound occurs.
4.2. When operating to [2.T&A]
- Set to Menu → 3.Option → 1. Application → [2.T&A].
- If you set <Attend> and <Leave > under the condition that the attend time is constant, even if
authentication is attempted without pressing [F1] or [F2] keys, the fingerprint is
authenticated to ‘Attend’ within the time zone set to ‘Attend’ and to ‘Leave’ within the time
zone set to ‘Leave’. Therefore, users can reduce the T&A input error.
4.2.1. Authentication Mode
- Press function keys to change the authentication mode to Attend, Leave, Outdoor, Return,
and Access, and then perform authentication with each authentication mode.
- Authentication Method
 Attend Authentication: Press [F1] key to change to the attend mode, and then perform
authentication. Authentication is performed without changing the mode within the time
zone set to the Attend time.
 Leave Authentication: Press [F2] key to change to the leave mode, and then perform
authentication. Authentication is performed without changing the mode within the time
zone set to the Leave time.
 Outdoor Authentication: Press [F3] key to change to the outdoor mode, and then perform
authentication.
 Return Authentication: Press [F4] key to change to the return mode, and then perform
authentication.
 Access Authentication: Press twice [F4] key or press [F4] key long to change to the
access mode, and then perform authentication. Or, perform authentication without
changing the mode within the time zone set to the access time.
4.2.2. Fingerprint Authentication
- Press the function key to change the T&A mode.
- Enter your fingerprint.
4.2.3. Authentication Using Card
- Press the function key to change the T&A mode.
- Place the card on the terminal.
4.3. When operating to [2.Cafeteria]
- Set to Menu → 3.Option → 1. Application → [3.Cafeteria].