2 AC-5000 User Guide Version Date Description Firmware Version 1.00 2011-01-10 Initial Release 10.51.00-000.00 Admin (Administrator) - As a user who can enter the terminal menu mode, he/she is authorized to register/modify/delete terminal users and change the operating environment by changing the settings. - If there is no administrator registered for a terminal, anyone can enter the terminal menu and change the settings.
AC-5000 User Guide 3 LFD (Live Finger Detection) - This function allows the input of only real fingerprints and blocks the input of imitation fingerprints produced using rubber, paper, film, and silicone. UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong Songpa-gu, Seoul, Korea (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
4 AC-5000 User Guide Table of Contents .................................................................................................... 2 ................................................................................................................ 2 Table of Contents .....................................오류! 책갈피가 정의되어 있지 않습니다. 1. Before use............................................................................................................. 6 1.1.
AC-5000 User Guide 5 3.6.4. Language............................................................................................ 41 3.6.5. Data Time ........................................................................................... 41 3.6.6. Database ............................................................................................ 42 3.7. Terminal...................................................................................................... 44 3.7.1. Terminal Option ............
6 AC-5000 User Guide 1. Before use 1.1. Safety precautions Warning Do not handle the unit with wet hands and do not allow liquid to flow into it. -> It may cause an electric shock or damage. Do not place a fire source near the unit. -> It may cause a fire. Do not disassemble, repair, or modify the unit. -> It may cause an electric shock, fire or damage. Keep out of children’s reach. -> It may cause an accident or damage. - If the above warnings are ignored, it may result in death or serious injury.
7 AC-5000 User Guide 1.2. Terminal description State Display LED LCD Fingerprint Sensor Touch Key Normally, the figure is invisible as LED is off, but LED is on and the figure is shown when the user touches this area lightly. Card Input Area 1.3. Screen description (during operation) Access Mode ① Fire Detection ② Warning of Terminal Disassembly, etc. ③ Door State ④ Connection with Server Current Time UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg.
8 AC-5000 User Guide 1.3.1.
9 AC-5000 User Guide - When any unregistered user ID is input - When fingerprint authentication is attempted in the event where the server is not connected and there is no registered fingerprint in the terminal - When any unregistered card is input - When fingerprint input is failed - When the user took the finger off too fast before the fingerprint is input - When Anti-pass back is in error (in the event the user uses the anti-pass back function) - When the user attempted two or more times at the sam
10 AC-5000 User Guide - When the terminal is set to Locked - When it is not the meal time (in the event it is set to Cafeteria) - When the authentication may not be treated as there are too many authentication requests from the terminal during the server authentication.
11 AC-5000 User Guide - At the time of fingerprint card authentication, it shows the status that the card reads fingerprint data. The user must put the card for 1~2 seconds until the message disappears. - When waiting for the response after the user attempted authentication to the server - When upgrading the terminal program (Be sure not to power off the terminal during the time the message is output) 1.4.
12 AC-5000 User Guide ENT [or MENU] [ENT~] - Used for modifying the mode - Used for saving the value set in the menu mode or moving to the configuration in the screen - Means pressing [ENT] key for 2 seconds or longer - Used for accessing the menu when pressed on the basic screen - When input focus is located in the input box, the user can exit to the parent menu with the current input value saved by pressing it for 2 seconds or longer - Used to apply the configuration to the current screen in the menu
AC-5000 User Guide 13 Input the fingerprint of your forefinger if possible. It will facilitate the accurate and stable input of fingerprint. Please check if the fingerprint is not clear or has any scar. Too dry or wet fingerprint, ambiguous fingerprint, fingerprint with scar, etc. may not be recognized. In this case, use/register the fingerprint of another finger.
AC-5000 User Guide 14 2. Product introduction 2.1. Features Application of POE and Terminal Block – Easy to install - As it supports POE, it can be installed with LAN cable without a separate power cable. Designed in IP65 rainproof specification – Outdoor installation is possible.
15 AC-5000 User Guide registering a user or administrator.
16 AC-5000 User Guide 2.2. Configuration 2.2.1. Standalone (Access) DC12V Adapter Electromagnetic Lock (Lock+, Lock-, Monitor) 2.2.2. Connect with PC SERVER (Access, Time & Attendance, Cafeteria) TCP/IP TCP/IP TCP/IP Internet / WAN / LAN TCP/IP Fingerprint authentication server (Fixed IP) UDB Server Database (MDB or MSSQL) Remote Admin Program (User and terminal setting management) TCP/IP Cafeteria management program TCP/IP Time & attendance management program UNIONCOMMUNITY Co., Ltd.
17 AC-5000 User Guide 2.3. Specification Division SPEC CPU 32Bit RISC CPU (400MHz) Rainproof IP65 LCD 2.8” TFT Color (320*240) Touch Key 15key (0~9, F1~F4, Enter) REMARK 32M SDRAM MEMORY 32M FLASH Fingerprint sensor Optical Authentication speed Within 1 second Scan Area / Resolution 15 * 17mm / 500 DPI FRR / FAR 0.1% / 0.
AC-5000 User Guide UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong Songpa-gu, Seoul, Korea (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
19 AC-5000 User Guide 3. Environment settings 3.1. Items to be checked before environment settings 3.1.1. Enter the Menu Press [ENT] key for two seconds or longer, then the user can access the screen for menu selection as follow; User can transfer to each sub menu and have access by pressing the relevant number key.
20 AC-5000 User Guide ① Remove the bracket at the backside of the terminal to open the lid. ② With the lid open, as shown in the figure below, connect pin No. 1 with pin No. 3, and pin No. 2 with pin No. 4 of J404 connector respectively at backside. ③ Access the menu by pressing [F4(←)]key for 2 seconds or longer, fill Admin ID with ‘0’ on Verify Admin screen in , and then press [ENT]key. The user can then access the menu selected with the buzzer sounding “Brrrrrrp” .
AC-5000 User Guide 21 then input the new value using [0]~[9] key. ▶ ② Select Button In case of selecting an item out of the given sample like ‘Fake Finger Detect’, user must modify the item selection ( ) by pressing the relevant number key, provided that, user must select the item after moving the focus from the input box by pressing [ENT] key if the focus is located at the input box as shown in .
22 AC-5000 User Guide Select [1.Yes] to save the revised contents or [2.No] to cancel it, and then press [ENT] key. If there is no input for a certain period of time in this case, it returns to the initial screen. If there is no revised contents, it exits from the environment settings menu without the aforementioned process of “Save?”. When the settings are changed in the menu, if there is no input for a certain period of time, it exits from the environment setting menu.
23 AC-5000 User Guide 3.2. Menu Configuration 1. User 1. Add 2. Delete 3. Modify 4. Delete All 2. Network 1. IP 2. Server IP 3. Terminal ID 3. Application 1. Application 1. Static IP / 2. DHCP ▶IP Address ▶Subnet Mask ▶Gateway ▶Server IP ▶Server Port ▶Terminal ID ▶Authentication ▶Application 1. Access 2. Time & Attendance 3. Cafeteria 2. Time Schedule ▶F1 Time ▶F2 Time ▶F3 Time ▶F4 Time ▶Access Time □NO Limit (when setting to catering management) 3.
24 AC-5000 User Guide 4. System 1. System Setting 2. Authentication 3. Fingerprint ▶UserID Length ▶Display Option ▶User GroupIP ▶Enable 1:N ▶Card Only ▶Template On Card ▶Verify Multi-FP ▶Blocking Time (sec.) ▶1:1 Level [1~9] ▶1:N Level [3~9] ▶Fake Finger Detect □Check SameFP 4. Language 5. Data Time 5. Terminal ▶Time Sync ▶Display Time ▶Set Current Time 6. Database 1. Init Config 2. Delete All Users 3. Clear Log Data 4. Initialize Terminal 1.
25 AC-5000 User Guide 6. Information 1. System Info 2. Network Info 3. Database Info 4. View Log 5. Version Info 3.3. User Select “1. User” in the main menu, then the following screen will appear. Press [1] key to register new user, [2] key to delete user, [3] key to modify user, and [4] key to delete all users. 3.3. 1. Add ◆ Select [ENT~] [1. User] [1. Add] ◆ in the basic screen, then the following screen will appear. Input the user ID to be registered and then press [ENT] key.
26 AC-5000 User Guide As shown on the screen, the user can register by pressing [2] for fingerprint, [3] for card, and [4] for password. Basically, it is registered in the name of the user. Using the keys [7] and [8], the user can modify into the user and the admin. Once the registration is completed, the user can press [ENT] to save it. The user must press [F4(←)] key to cancel the registration and exit from the menu.
27 AC-5000 User Guide ③ When input is complete, the message at the left will appear together with its image accompanied by quality rating in 0~100. If the image is not adequate from the visual aspect or any image shows 30 or less, the user is advised to register again. To register again, start the process from by pressing [F4(←)] key until 3 seconds elapse without input or pressing another key. After completion, it moves to the parent menu. ① ※ Fingerprint registration is available up to 10 per ID.
28 AC-5000 User Guide Input the password in 1~8 digits on the password input screen and press [ENT] key. The ‘Confirm Password’ window will appear again. Input the same password and press [ENT] key. Press [F4(←)] key for 2 seconds or longer to cancel it and exit. 3.3.1.5. FP Option As it is the settings related with fingerprint, it is the option that can be changed after registering the fingerprint in advance.
29 AC-5000 User Guide When it is registered normally with [6. Save] key pressed When registration is failed with [6. Save] key pressed When the registration means is not registered properly in accordance with the authentication method, for example, the user didn’t register any fingerprint after setting it as authentication means, nor register any card after setting it as authentication means. In the case of [2.
30 AC-5000 User Guide In case of [2. FP Register], when the user intends to register again the fingerprint that has already been registered. ※ If the user wants to register the same fingerprint with other ID again, he/she must release ‘4. System 3. Fingerprint Check SameFP’ function. This is, however, not suitable for time & attendance, etc. as the same fingerprints can be authenticated with different IDs at the time of authentication. In case of [2. FP Register] or [3.
31 AC-5000 User Guide When it is deleted normally When the user inputs an unregistered ID 3.3.3. Modify ◆ [ENT~] [1. User] [3. Modify] in the initial screen When the user selects following screen will appear. ◆, the Press [ENT] key after inputting the user ID to be changed. When inputting an unregistered ID, the failure message will appear. When inputting a registered ID, the following screen will appear. The icons at the left are described by their respective meanings on the right.
32 AC-5000 User Guide 3.3.4. Delete All ◆ [ENT~] [1. User] [4. Delete All] in the initial screen When the user selects following screen will appear. ◆, the If the user is sure to delete all users, press [1.Yes] while press [ENT] key after selecting [2.No] to cancel it. ※When the user selects [1.Yes], both user and admin are deleted. Special care should be taken as the deleted user/admin may not be restored after deletion. 3.4. Network When the user selects “2.
33 AC-5000 User Guide No need to set them if the user selected a flexible IP. The user can exit to the parent menu using [ENT~] key to apply the changed value after finishing the setting while using [F4(←)] key to cancel input during setting. In this case, the user can exit only by pressing the key for 2 seconds or longer if he/she is inputting the value in the input box. 3.4.2. Server IP ◆ When the user selects [ENT~] [2. Network] [1.
34 AC-5000 User Guide 1.Server/Terminal Authentication is made by the server when it is connected to the server while by the terminal when it is disconnected to the server due to network disturbance, etc. 2.Terminal/Server Authentication is made by the terminal even if the server is connected and the result of authentication is transferred to the server on a real-time basis. However, authentication is made by the server when the input user ID or card is not registered in the terminal.
35 AC-5000 User Guide Select the operation type of the terminal by pressing the applicable number key. Press [ENT] key to apply the configuration while [F4(←)] key to cancel it. 3.5.2. Time Schedule 3.5.2.1. Setting to Access / Time & Attendance ◆ When the user selects [ENT~] [3. Application] [2. Time Schedule] in the initial screen , the following screen will appear.
36 AC-5000 User Guide Exit to the parent menu by pressing [ENT~] key to apply the changed value after finishing the setting while pressing [F4(←)~] key to cancel the input value. 3.5.2.2. . Setting to Cafeteria ▶Initial setting: Identical with the screen at the left The user can set the time zone by meal types; otherwise, set to ‘00:00-00:00’.
37 AC-5000 User Guide ◆ When the user selects [ENT~] [3. Application] [4. Extended Key] in the initial screen , the following screen will appear. ◆ , ▶Initial setting: Identical with the screen at the left To use the Extended Key, press [1] key and then check ‘1. Extended Key. The number of extended keys can be set within the range of 1~40.
38 AC-5000 User Guide ▶Initial setting: Identical with the screen at the left ▶Background image The user can change the background image of the initial screen by pressing [1] and [2] keys. Also, the user can set the cycle to 5 seconds or longer to have the background images saved in the terminal displayed sequentially at every preset interval (seconds).
39 AC-5000 User Guide ▶Initial setting: Identical with the screen at the left ▶ UserID Length This field sets the length of user ID, which can be changed within the range of 1~9 digits. It must be identical with the length of ID registered in the server program. For example, the user must set it to 6 if the ID registered in the server program is ‘000075’ which is 6 digits. ▶ Display Option If set to ‘1. None’, it displays the authentication result message only when authentication is successful.
40 AC-5000 User Guide authentication is permitted in the terminal where this option is not checked ▶Card Only If checked ( ), this option enables to authenticate with card only without inputting fingerprint. Even if the user is registered with (Card & FP) or (Card & PW), only authentication with card is permitted in the terminal where this option is checked.
41 AC-5000 User Guide ▶1:1 Level Authentication level that is used for 1:1 Fingerprint Authentication, provided that, 1:1 authentication level of the relevant user shall apply for the user whose 1:1 authentication level is not set to ‘0’ (using the authentication level of the terminal) ▶1:N Level Authentication level that is used for 1:N Fingerprint Authentication.
42 AC-5000 User Guide ▶Initial setting: Identical with the screen at the left ▶ Time Sync It sets the method that synchronizes the current time of the terminal with the server. To synchronize the terminal time with the server time, set to ‘1. Auto’ to perform it automatically while ‘2. Manual’ to perform it manually.
43 AC-5000 User Guide Press [1.Yes] key to initialize all configurations while select [2.No] and press [ENT] key to cancel it. When no value is input for a certain period of time in this state, it returns to the initial screen instead of initialization. It initializes all the configurations of the terminal except MAC (physical) address but it doesn’t delete the user and authentication record.
44 AC-5000 User Guide It deletes all the logs related to authentication, and the deleted logs may not be restored after deletion. When deletion is successfully completed, it proceeds to the parent menu accompanied by the success buzzer sounds. 3.6.6.4. Initialize Terminal ◆ When the user selects [ENT~] [4. System] [6. Database] [4. Initialize Terminal] in the initial screen , the following screen will appear. ◆ Press [1.
45 AC-5000 User Guide ▶Initial setting: Identical with the screen at the left ▶Dooropen Door is opened when pressing ‘0’ key. It appears only when the terminal is locked. This is option not normally shown. ▶ Terminal Alarm If checked, ( ), it generates a warning sound when the lid of the terminal is opened. ▶ Lock Terminal This is the function that the administrator can directly set or release the locking of the terminal through the terminal instead of server program.
46 AC-5000 User Guide 3.7.3. Door ◆ When the user selects [ENT~] [5. Terminal] [3. Door] the following screen will appear. in the initial screen ◆, ▶Initial setting: Identical with the screen at the left ▶Lock Type Set to ‘1’ when strike type or automatic door is connected with the terminal while ‘2’ when motor lock is connected to the terminal. In case that no connection is made, it is also set to ‘1’.
47 AC-5000 User Guide The user can exit to the parent menu using [ENT~] key to apply the changed value after finishing the setting while using [F4(←)] key to cancel input during setting. . 3.7.4. Wiegand When the user selects [ENT~] [5. Terminal] [4. Wiegand] in the initial screen following screen will appear. ◆, the ▶Initial setting: Identical with the screen at the left This is the menu that configures the Wiegand Output.
48 AC-5000 User Guide When the user selects [ENT~] [5. Terminal] [5. Card Reader] in the initial screen the following screen will appear. ◆, ▶Initial setting: Identical with the screen at the left ▶ Read Card NO. When the user puts the card on this screen, the card number will be displayed on the LCD. ▶Card Format This is the menu that sets the manner of displaying the card number. As shown below, the displayed card number varies depending on the configuration.
49 AC-5000 User Guide 3.7.6. External Device When the user selects [ENT~] ( [5. Terminal] [6. External Device] ) in the initial screen following screen will appear. ◆, the ▶Initial setting: Identical with the screen at the left ▶Printer If checked ( ), it prints out the authentication result. When set to ‘1’, if authentication is successful, the terminal ID, user ID, authentication time, authentication mode, etc.
50 AC-5000 User Guide Press [F4(←)] key to exit to the parent menu. 3.8.2. Network Info Select ◆ [ENT~] [6. Information] [2. Network Info] in the initial screen ◆ Press [F4(←)] key to exit to the parent menu. 3.8.3. Database Info Select ◆ [ENT~] [6. Information] [3.
51 AC-5000 User Guide - All Log: Number of logs saved in the terminal - Max Log: Maximum number of logs that can be saved Press [F4(←)] key to exit to the parent menu. 3.8.5. Version Info Select ◆ [ENT~] [6. Information] [5. Version Info] in the initial screen ◆ Press [F4(←)] key to exit to the parent menu. 3.9. Downloading user’s file The function allows the user to change background image or voice message when necessary. The user’s file can be downloaded from UNIS server program. 3.9.1.
AC-5000 User Guide 52 3.9.2. Change Voice Message When selecting ‘Download customized file’ in UNIS program, the following screen will appear. Designate the file as ‘Success voice file (.wav)’, select Wav file (.wav) and click the ‘Send’ button, then the terminal select window will appear. When selecting the terminal from the terminal list window and clicking the ‘Send’ button once again, the file is transmitted with the downloaded result displayed.
AC-5000 User Guide UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong Songpa-gu, Seoul, Korea (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
54 AC-5000 User Guide 4. How to use terminal 4.1. Change of authentication mode Press the desired mode key Touch the hand Normally, it is not visible; but when the user touches the hand on the card input area as shown in the Figure at the left, LED will be powered ON and a keypad will appear as shown in the Figure at the right.
55 AC-5000 User Guide Delete with [F4(←)] key if the figure is wrongly input during the input process. When pressing [ENT] key after inputting ID, the fingerprint input or password input screen appears depending on the method of user authentication. However, authentication will fail if a card user inputs ID first. Therefore, be sure to use the card. 4.3. Authentication 4.3.1.
