AC-5000, 5100 User Guide Version eng-2.07 Copyright 2000 By Union Community Co., LTD.
AC-5000 / 5100 User Guide 2 Version Date Description Firmware Version 2.00 2015-07-13 Initial Release 30.62.00-000.00 2.01 2015-10-19 30.62.00-000.01 2.02 2015-11-18 2.03 2016-01-07 1.2. Terminal Description 2.1. Features 2.3. Specification 3.2. Menu Configuration 3.7.7. Mobile Card Option 3.6.1. System Setting 3.6.4. Language 3.6.2. Authentication 2.04 2016-03-28 2.1. Features Various register and changing Auth Type(13->12) 3.7.1. Terminal Option Big character use 3.6.
AC-5000 / 5100 User Guide 3 AC5000: Terminals not supported by Camera / Mobile card(BLE) AC5100: Terminals supported by both Camera / Mobile card(BLE) Admin, Administrator - A user who can enter the terminal menu mode. They are authorized to register/modify/delete terminal users and alter the operating environment by changing the settings. - If there is no administrator registered for a terminal, anyone can enter the terminal menu and change the settings.
AC-5000 / 5100 User Guide Table of Contents .................................................................................................... 2 1.2. Terminal Description ................................................................................... 2 2.1. Features ....................................................................................................... 2 2.3. Specification ............................................................................................
AC-5000 / 5100 User Guide 5 3.3.4. Delete All ............................................................................................ 35 3.4. Network ...................................................................................................... 35 3.4.1. IP ........................................................................................................ 36 3.4.2. Server IP............................................................................................. 36 3.4.2.1.
AC-5000 / 5100 User Guide 1. Before Use 1.1. Safety Precautions Warning Do not handle the unit with wet hands and do not allow liquid to flow into, or on, it. -> It may cause an electric shock or damage. Do not place a fire source near the unit. -> It may cause a fire. Do not disassemble, repair, or modify the unit. -> It may cause an electric shock, fire or damage. Keep out of children’s reach. -> It may cause an accident or damage.
AC-5000 / 5100 User Guide 1.2. Terminal Description State Display LED Camera (AC5100 only) LCD Fingerprint Sensor Touch Key Normally, the figures are invisible as the LED is off. LED turns on and the figures illuminate when the user lightly touches this area Card Input Area UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
AC-5000 / 5100 User Guide 1.3. Screen Description (During Operation) ① Fire Detection ②Warning of Terminal Disassembly, etc. Access Mode ③Door State ④Connection with Server Current Time 1.3.1. Icons Shown During Operation None : Normal : State when fire is detected by a fire sensor (subject to the appropriate fire sensor connection). None : Normal. ① Fire Detection ② Warning : Abnormal state when terminal is disassembled or door has encountered a problem. : Door status is unknown.
AC-5000 / 5100 User Guide 1.3.2. Message Shown During Operation - Initial screen of AC5000. - When authentication is successful. - When authentication has failed. - When any unregistered user ID is input. - When fingerprint authentication is attempted where the server is not connected or there is no registered fingerprint in the terminal. - When any unregistered card is input. - When fingerprint input has failed. - If the user removed their finger too quickly before the fingerprint was identified.
AC-5000 / 5100 User Guide - If a user made two or more attempts at the same meal time zone (if being used for cafeteria operation). - If there is no response from the server when attempting authentication to the server. - When network is disconnected during an authentication attempt to the server. - When the user is not authorized for authentication, even if they are registered, or the user attempted authentication when access is not allowed. - When the terminal is set to Locked.
AC-5000 / 5100 User Guide - Status waiting for password input from the user. - Status waiting for fingerprint input from the user. - Status waiting for card input from the user. - During fingerprint card authentication, it shows the status when the card reads fingerprint data. The user must put the card for 1~2 seconds until the message disappears. - When waiting for a response, after the user attempted authentication by the server. - When upgrading the terminal program.
AC-5000 / 5100 User Guide 1.4. LED Signal Shown During Operation ● Pow er Red On: Normal Flickering: When the lid is open, or there is any communication error in the connection with the LC010. ● Door Green On: Door Open Off: Door Closed Stat us Red+Green Blinking: Display during BLE connection 1.5. Keys Used During Operation [0]~[9] - Keys used for number input. [F1]~[F3] - Keys used for changing the authentication mode. - Used for changing the authentication mode.
AC-5000 / 5100 User Guide When authentication is successful When authentication has failed You are authorized. Please try again 1.7. Buzzer Sounds Used During Operation Beep Sound that is generated when a key is pressed or a card is being manipulated When the key is pressed or card is read; When fingerprint input is completed and the user may take their finger off. Be peep Sound of failure When authentication has failed or when the user’s fingerprint is wrongly input.
AC-5000 / 5100 User Guide 14 Precautions related to the user’s fingerprint status: Depending on the fingerprint status, the user may not use fingerprint or suffer inconvenience from its use. This product is a fingerprint recognition system. Any fingerprint that is damaged or thin may not be used. In such cases, the user should operate with a password. If a finger is in a dry condition, we advise breathing lightly on the finger for a smooth operation.
AC-5000 / 5100 User Guide 15 2. Product Introduction 2.1. Features IP65 Environmental standard is designed for Outdoor installation Slim and sophisticated design - Easy to install as it is designed as a vertical type; Slim and elegant design using Color LCD and Touch Keys Download Server Functions – Change the LCD background image and voice - Provides a variety of information messages via the color LCD screen and voices.
AC-5000 / 5100 User Guide FP Fingerprint Registration Fingerprint Authentication PW Password Registration Password Authentication FP or PW Fingerprint and Password Registration Password Authentication when Fingerprint Authentication fails FP & PW Fingerprint and Password Registration Fingerprint Authentication and then Password Authentication Card Card Registration Card Authentication Card or FP Card and Fingerprint Registration Card or Fingerprint Authentication Card & FP Card and Fingerp
AC-5000 / 5100 User Guide 2.2. Configuration 2.2.1. Standalone (Access) DC12V Adapter Electromagnetic Lock (Lock+, Lock-, Monitor) 2.2.2. Connect with PC SERVER (Access, Time & Attendance, Cafeteria) TCP/IP TCP/IP TCP/IP Fingerprint Authentication Server (Fixed IP) UDB Server Database (MDB or MSSQL) Internet / WAN / LAN TCP/IP Remote Admin Program (User and terminal setting management) TCP/IP Cafeteria Management Program TCP/IP Time & Attendance Management Program UNIONCOMMUNITY Co., Ltd.
AC-5000 / 5100 User Guide 2.3. Specification Category SPEC CPU 32Bit RISC CPU(528MHz) Environmental IP65 LCD 2.8” TFT Color (320*240) Touch Key 15key (0~9, F1~F4, Enter) REMARK 32M SDRAM MEMORY 20,002 User 20,002 Finger 1:N 15000 User 1:1 5002 User 63,488 Log 32M NOR FLASH 128M NAND FLASH Fingerprint Sensor Optical Authentication Speed Within 1 sec Scan Area / Resolution 15 * 17mm / 500 DPI FRR / FAR 0.1% / 0.
AC-5000 / 5100 User Guide Card Reader 126.5 KHz RF or 13.56MHz Smart (1 Sam Socket) or HID Card SIZE 88.0mm * 175.0mm * 43.4mm UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
AC-5000 / 5100 User Guide 3. Environment Settings 3.1. To be checked before environment settings. 3.1.1. Enter the Menu. Press the [ENT] key and hold for two seconds or longer. The user can access to the screen for menu selection, as follows: User can transfer to, and have access to, each sub menu by pressing the relevant number key.
AC-5000 / 5100 User Guide This is the way to access the menu if fingerprint authentication is impossible, or because the user forgot the admin password, or lost the card registered on the terminal, or there is no Admin. ① Remove the bracket on the rear of the terminal to open the lid. ② With the lid open, as shown in the figure below, connect pin 1 to pin 3, and pin 2 to pin 4 of connector J404. ③ Access the menu by pressing and holding the [F4(←)] key for 2 seconds or longer.
AC-5000 / 5100 User Guide 22 ▶ ① Input Box For items where the value is directly input, such as the ‘1:1 Level’, users must delete the existing value using the [F4 (←)] key when the applicable item is highlighted. Then input the new value using the [0] ~ [9] keys. ▶ ② Select Button For items such as ‘Fake Finger Detect’, the user should modify the selection ( ) by pressing the relevant numeric key, provided the item is first highlighted.
AC-5000 / 5100 User Guide 23 Press the [F4 (←)] key to cancel, while setting, and move back to the parent menu. When the highlight is located at the input box the [F4 (←)] key functions as a [DEL] key, which deletes figures one by one. Press the [F4 (←)] key for two seconds, or longer, to cancel input and exit to the parent menu. Press the [ENT] key for two seconds, or longer, to save the current configuration and move to the parent menu 3.1.4.
AC-5000 / 5100 User Guide 3.1.5. Save Environment Settings Press the [F4 (←)] key in the main menu screen of to save the changed settings, and the following screen appears: Select [1. Yes] to save the new configuration or [2. No] to cancel it. Then press the [ENT] key. In this instance, if, after a period of time there is no input the system returns to the initial screen.
AC-5000 / 5100 User Guide 3.2. Menu Configuration 1. User 1. 2. 3. 4. Add Delete Modify Delete All 2. Network 1. IP 1. Static IP / 2. DHCP ▶IP Address ▶Subnet Mask ▶Gateway 2. Server IP 1. Static IP 2. DDNS ▶Server IP ▶DDNS ID ▶Server Port ▶DDNS IP ▶Server port 3. Terminal ID ▶Terminal ID ▶Authentication 3. Application 1. Application ▶Application 1. Access 2. Time & Attendance 3. Cafeteria 2.
AC-5000 / 5100 User Guide 4. Extended Key ▶ Extended Key ▶of Extended Key 5. Display ▶ Background ▶ Screensaver ▶ Clock position 6.RS485 ID Setting ▶RS485 ID Setting UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
AC-5000 / 5100 User Guide 4. System 1. System Setting ▶User ID Length ▶Display Option ▶Threat fingerprint alarm ▶Alarm time (sec) 2. Authentication ▶User Group IP ▶Enable 1:N ▶Card Only ▶Template On Card ▶Verify Multi-FP ▶Blocking Time (sec.) ▶NetErrTime(Sec) 3. Fingerprint ▶1:1 Level [1~9] ▶1:N Level [3~9] ▶Fake Finger Detect ▶Template types ▶Check Same FP 4. Language 5. Data Time ▶Time Sync ▶Display Time ▶Set Current Time ▶Calendar 5. Terminal 6. Database 1. 2. 3. 4.
AC-5000 / 5100 User Guide 3. Door ▶Lock Type ▶DM1 ▶DM2 ▶Open Duration ▶Warn Door Open 4. Wiegand □Bypass ▶Wiegand Out ▶Site Code 5. Card Reader ▶Card Format ▶Read Card NO. ▶Dummy Mode 6. External Device ▶Printer ▶Lock Controller ▶Connection Device Setting □Mode 7. Mobile Card Option (AC5100 only) ▶Use Mobile Key ▶Terminal Register ▶BLE Name 6. Information 1. 2. 3. 4. 5. System Info Network Info Database Info View Log Version Info 3.3. User Select “1.
AC-5000 / 5100 User Guide 3.3. 1. Add ◆ Select [ENT~] [1. User] [1. Add] ◆ in the basic screen, and the following screen appears: Input the user ID to be registered and press the [ENT] key. Automatically shows the ID to be registered on the screen, so the user can easily perform registration. To modify the ID, press the [F4 (←)] key and delete the existing value and input the new value. If the user inputs an already registered ID, a failure message appears.
AC-5000 / 5100 User Guide Press the [F4 (←)] key to delete the existing value, enter the authentication method you want to use among the authentication methods shown on the screen, and press the [ENT] key. If you select [AND] mode, authentication will proceed normally with the authentication method. (Priority: Card -> Fingerprint -> Password) When selecting [OR] mode, only two authentication types can be selected.
AC-5000 / 5100 User Guide If repeated failure is observed after 2~3 attempts when using the correct fingerprint registration method, the user is advised to use password or card. 3.3.1.3. Card Register When registration screen appears, put the card on it. If you want to exit without registration, press the [F4 (←)] key. 3.3.1.4. PW Register Input the password in 1~8 digits on the password input screen and press the [ENT] key. The ‘Confirm Password’ window appears.
AC-5000 / 5100 User Guide ▶’1:1 Level’ (Initial setting: ‘0’) Is the item that determines the authentication level for each registered user. By modifying this value, it is possible to determine the authentication level per registered user. When set to ‘0’, it conducts authentication using the 1:1 authentication level of the terminal. ▶Enable 1:N (Initial setting: ‘v’) When this option is checked, it’s possible to successfully authenticate using a fingerprint without any user ID or card. 3.3.1.6.
AC-5000 / 5100 User Guide In the case of [4. PW Register] When the user inputs a different number during password confirmation. In the case of [3. Card Register] When the user tried to register a card that has already been registered. In case of [2. FP Register], when the user tried to register a fingerprint that has already been registered. ※ If the user wants to register the same fingerprint with another ID again, they must the release ‘4. System 3. Fingerprint Check Same FP’ function.
AC-5000 / 5100 User Guide Input the user ID to be deleted, and then press the [ENT] key. When inputting an unregistered ID, a failure message will appear. When inputting a registered ID, a success message will appear. Deleting from the terminal doesn’t mean deletion from the server. Therefore, it is necessary to delete from the server to make the deletion complete. Special care should be taken when deleting, since deletion is performed regardless of User/Admin.
AC-5000 / 5100 User Guide Press the [ENT] key after inputting the user ID to be changed. When inputting an unregistered ID, a failure message will appear. When inputting a registered ID, the following screen appears: The icons on the left are described with their respective meanings on the right. Authentication type (FP) Number of Registered Fingerprints (1) Number of Registered Cards (0) ( Whether or not the Password is Registered : Not registered) For the method of changing, see ‘3.3.1.
AC-5000 / 5100 User Guide Press the applicable key that represents the item to be changed. 3.4.1. IP Select ◆ [ENT~] [2. Network] [1. IP] in the initial screen ◆, and the following screen appears: When changing IP, delete the existing values using [F4 (←)] and then input the new values. The ‘.’ in between the number sequence is created automatically. Example: input 192 168 010 50 sequentially to input ‘192.168.10.50’.
AC-5000 / 5100 User Guide Select server IP type for server IP setting. 1. Static IP: If you know the server IP and port number 2. DDNS: When connecting the server by DDNS After selecting the type, press [ENT~] key to enter detailed information. To cancel input, press [F4 (←) ~] key to exit to upper menu. 3.4.2.1. Server IP settings Select ◆ [ENT~] [2. Network] [2. Server IP] [1.StaticIP] in the initial screen ◆, and the following screen appears: Set the Server IP and Port.
AC-5000 / 5100 User Guide Set DDNS ID, DDNS IP and server port. DDNS ID can be input from 9 digits 1 to 999999999 can be input. The default value of DDNS IP is 210.116.104.058, and enter the IP of DDNS server to be connected. To change the port, press the [ENT] key to move the input focus to the server port and enter it. ▶Initial Setting Server Port: ‘9870’ The default port value of the authentication server is '9870' for the UNIS server and '2201' for the Access server.
AC-5000 / 5100 User Guide Authentication is made by the terminal, even if the server is connected, 2. Terminal/Server and authentication result transferred to the server on a real-time basis. 3. Server Only However, authentication is made by the server when the input user ID or card is not registered in the terminal (it doesn’t attempt server authentication in case of 1:N fingerprint authentication). 4.
AC-5000 / 5100 User Guide 3.5.2. Time Schedule 3.5.2.1. Setting to Access Control / Time & Attendance Select ◆ [ENT~] [3. Application] [2. Time Schedule] in the initial screen ◆, and the following screen appears: ▶ Initial setting: Identical with the screen on the left. The user can set the time period for authentication mode; otherwise, set to ‘00:00-00:00’. Input after deleting the existing value using [F4 (←)] to change the value.
AC-5000 / 5100 User Guide 3.5.2.2. Setting to Cafeteria ▶ Initial setting: Identical with the screen on the left. The user can set the time period by meal types; otherwise, set to ‘00:00-00:00’. ▶ NO Limit Clear the check box ( ), and each user is allowed one authentication by meal only. If you check the box ( ) they are allowed several authentications regardless of the existing authentication. 3.5.3. Function Key Select ◆ [ENT~] [3. Application] [3.
AC-5000 / 5100 User Guide ▶Initial setting: Identical with the screen on the left To use the Extended Key, press the [1] key and then check ‘1. Extended Key’. The number of extended keys can be set within a range of 1~40. Extended Key is a function which extends the number of additional authentication modes (up to 40 as required) in addition to the basic function keys ([F1] ~ [F4], [ENT]). The screen for selecting the extended keys, when the user presses the F4 key, is shown below.
AC-5000 / 5100 User Guide 3.5.5. Display Select ◆ [ENT~] [3. Application] [5. Display] on the initial screen ◆, and the following screen appears: ▶Initial setting: Identical with the screen on the left ▶Background image You can change the background image shown on the initial screen by pressing the [1] and [2] keys.
AC-5000 / 5100 User Guide Press the applicable key representing the item to be changed. 3.6.1. System Setting Select ◆ [ENT~] [4. System] [1. System Setting] in the initial screen ◆, and the following screen appears: ▶ Initial setting: Identical with the screen on the left ▶ User ID Length This field sets the length of user ID, which can be changed within the range of 1~9 digits. It must be identical to the length of ID registered in the server program.
AC-5000 / 5100 User Guide 3.6.2. Authentication Select ◆ [ENT~] ([4. System] [2. Authentication]) in the initial screen ◆, and the following screen appears: ▶ Initial setting: Identical with the screen on the left ▶ User Group ID The method of authentication where the initial digit of an ID relates to a group. It completes 1:N authentication faster when more than 5,000 users are registered.
AC-5000 / 5100 User Guide ▶ Verify Multi-FP If checked ( ), this function has all the registered fingerprints to be authenticated after the user inputs ID (or Card). When this item is set to checked, the user must, without fail, input user ID or card. In this case, Enable 1:N is automatically changed to unchecked ( ). This function is used for strict access control to special zones.
AC-5000 / 5100 User Guide authentication level of the relevant user is applied for the user whose 1:1 authentication level is not set to ‘0’ (using the authentication level of the terminal). ▶1:N Level Authentication level used for 1:N Fingerprint Authentication. In case of 1:N authentication, the authentication level by users is not set and therefore always based on the authentication level of the terminal. ▶ Fake Finger Detect It presets LFD level to prevent imitation fingerprint input.
AC-5000 / 5100 User Guide nature of fonts, some screens may not be displayed as all the languages. 3.6.5. Date Time Select ◆ [ENT~] [4. System] [5. Date Time] in the initial screen ◆, and the following screen appears: ▶Initial setting: Identical with the screen on the left. ▶ Time Sync Sets the method which synchronizes the current time of the terminal with the server. To synchronize the terminal time with the server time, set to ‘1. Auto’ to perform it automatically, while ‘2.
AC-5000 / 5100 User Guide Press the following keys: [1] key to initialize the configuration. [2] key to delete all users. [3] key to initialize the authentication record. and [4] key to initialize the terminal. 3.6.6.1. Init Config Select ◆ [ENT~] [4. System] [6. Database] [1. Init Config] in the initial screen ◆, and the following screen appears: Press [1. Yes] key to initialize all configurations and select [2. No] and press [ENT] key to cancel.
AC-5000 / 5100 User Guide When deletion is successfully completed, it proceeds to the parent menu accompanied by the success buzzer sound. 3.6.6.3. Clear Log Data Select ◆ [ENT~] [4. System] [6. Database] [3. Clear Log Data] in the initial screen ◆, and the following screen appears: Press the [1. Yes] key to delete all the authentication records saved in the terminal, or select [2. No] and press the [ENT] key to cancel.
AC-5000 / 5100 User Guide 3.7. Terminal Selecting ‘5. Terminal’ in the main menu causes the following screen to appear: Press the key corresponding to the item you want to change Press [F2] on the keypad to move to the next page. Press [F1] on the keypad to go to the previous page. 3.7.1. Terminal Option Select ◆ [ENT~] [5. Terminal] [1.
AC-5000 / 5100 User Guide ▶KeyLed ON If checked ( ), Key LED is always turned ON so the Touch Keys are visible. ▶ Use of the user voices, Use of user-defined messages Based on need/preference, you can download a voice from a Wav file (16bit/8KHz) to change the voice output when authentication is successful or has failed. Additionally, you can download the image text, in a modified form, such as office start or office leave, using the specially provided resource file (Excel file).
AC-5000 / 5100 User Guide 3.7.3. Door Select ◆ [ENT~] [5. Terminal] [3. Door] in the initial screen ◆, and the following screen appears: ▶Initial setting: Identical with the screen on the left. ▶Lock Type Set to ‘1’ when strike type or automatic door is connected to the terminal, or ‘2’ when motorized lock is connected to the terminal. If no connection is made, it is set to ‘1’. Set to ‘3’ when connecting a warning lamp to the lock port to indicate the success or failure of authentication.
AC-5000 / 5100 User Guide ▶Open Duration (0.1 sec unit) Designates the time the door is opened and closed again when authentication is successful. As it is set to 0.1 second per unit, a value of 30 is required to set it to 3 seconds. Strike type refers to the time the door is opened and closed again when authentication is complete. ▶Warn Door Open (Second Unit) This function enables the terminal to check the time the door opens, and generate a warning sound once it exceeds the preset time (min.
AC-5000 / 5100 User Guide 3.26bit Transmits “Site code[1byte] + user ID[2byte]”, so the user ID is set to 4 digits or less. Example: For SiteCode:045(2Dh), UID:6543(198Fh), is transmitted as ‘1 00101101 0001 1001 10001111 0’ 4.34bit Transmits “Site code[1byte] + user ID[3byte]” so the user ID is set to 7 digits or less. In case of an 8-digit user ID, “user ID[4byte]” is transmitted without Site code.
AC-5000 / 5100 User Guide 2. Hexadecimal number 0801161DD6 10-digit hexadecimal number 3. Decimal number 0018226646 Last 4byte to be expressed in a 10-digit decimal number (01161DD6h) 4. Decimal number 35 02207638 Same as ‘1. Default’ 5. Hexa_1 161DD6 Displays last 3bytes as the 6-digit hexadecimal number. SC card example: Card Number (4byte): 52h 9Dh 06h E3h Card Format Card number Method of Expression 1. Default 529D06E3 Expressed as an 8-digit hexadecimal number 2.
AC-5000 / 5100 User Guide ▶Printer To connect a Slave Reader which uses a card or a fingerprint as a secondary authentication device. If you would like a Wiegand card reader to be connected, set ‘7’ while SR100 should be ‘8’. If authentication occurred at the Slave Reader, ‘Dummy Reader’ would be displayed under ‘External Device’ on UNIS when the user looks up log history. [Mode] indicates an authentication mode of the external device.
AC-5000 / 5100 User Guide ▶Terminal Register You can register your device with the mobile server. You can register the terminal using APP manager of mobile phone. If registration is executed, it requests communication with the mobile phone for registration for 45 seconds. If communication is not established for 45 seconds, a failure screen is displayed. When the registration is completed, the success screen appears. ▶BLE Name The name registered on the mobile server is displayed.
AC-5000 / 5100 User Guide 3.8.2. Network Info Select ◆ [ENT~] [6. Information] [2. Network Info] in the initial screen ◆ Press the [F4 (←)] key to exit to the parent menu. 3.8.3. Database Info Select ◆ [ENT~] [6. Information] [3. Database Info] in the initial screen ◆ - Registered User: Number of registered users (including administrator). - Registered Admin: Number of registered administrators. - Max User: Maximum number of users that can be registered.
AC-5000 / 5100 User Guide 60 Press the [F4 (←)] key to exit to the parent menu. 3.8.5. Version Info Select ◆ [ENT~] [6. Information] [5. Version Info] in the initial screen ◆ Press the [F4 (←)] key to exit to the parent menu. 3.9. Downloading User’s File This function allows the user to change background image or voice message. User files can be downloaded from UNIS server program. 3.9.1.
AC-5000 / 5100 User Guide 61 3.9.2. Change Voice Message When selecting ‘Download customized file’ in UNIS program, the following screen appears: Designate the file as ‘Success voice file (.wav)’, select Wav file (.wav) and click the ‘Send’ button. The terminal select window will appear. Select the terminal from the terminal list window and click the ‘Send’ button again. The file is transmitted with the downloaded result displayed.
AC-5000 / 5100 User Guide 62 CSV file can be created and saved as a csv file type after changing the desired text in the Excel (.xls) file provided with the terminal firmware. To change from the user’s defined text to the default text, release the check mark in the ‘User Text’ item in ‘3.5.5 Display’. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr http://www.unioncomm.
AC-5000 / 5100 User Guide 4. How to use the Terminal 4.1. Change of Authentication Mode Touch by Hand Press the Desired Mode Key < Figure 4-1> Normally it’s not visible, but when the user touches their hand on the card input area - as shown in the Figure at the left – the LED’s are powered ON and the keypad appears - as shown in the Figure at the right.
AC-5000 / 5100 User Guide 64 4.2. ID input Normally it’s not visible, but as shown in Figure <4-1>, when the user touches their hand on the card input area, the LED’s are powered ON and the keypad appears. In this case, ID input screen appears when the user inputs their ID. Delete with the [F4 (←)] key if a figure is wrongly input during the input process.
AC-5000 / 5100 User Guide 4.3.3. Password Authentication Press the [ENT] key after inputting ID, and the screen for password input appears. When a wrong number is input, delete it using the [F4 (←)] key. Input the password and press the [ENT] key. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
AC-5000 / 5100 User Guide 66 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
