User's Manual

AC-5000 / 5100 User Guide 12
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
1.4. LED Signal Shown During Operation
●
Pow
er
Red
On: Normal
Flickering: When the lid is open, or there is any
communication error in the connection with the LC010.
●
Door
Green
On: Door Open
Off: Door Closed
Stat
us
Red+Green
Blinking: Display during BLE connection
1.5. Keys Used During Operation
[0]~[9]
- Keys used for number input.
[F1]~[F3]
- Keys used for changing the authentication mode.
[F4]
or [←]
- Used for changing the authentication mode.
- Used as the Delete key for correction when numbers are input.
- Used for cancelling input, and moving to a parent menu in menu
mode
[F4(←)~]
- It means to press the [F4 (←)] key for 2 seconds or longer.
- When input cursor is located in the input box, it cancels the input and
exits to the parent menu if pressed and held for 2 seconds or longer.
ENT
[or MENU]
- Used for modifying the mode.
- Used for saving the values set in menu mode, or moving to the screen
configuration.
[ENT~]
- It means to press the [ENT] key for 2 seconds or longer.
- Used for accessing the menu when pressing on the initial screen
- When input cursor is located in the input box, the user can exit to the
parent menu with the current input value saved by pressing the
button for 2 seconds or longer.
- Used to apply the configuration to the current screen in menu mode
and then exiting to the parent menu.
1.6. Used Voices During Operation
Type of Operation
Voice
For fingerprint input
Please enter your fingerprint