User's Manual

AC-5000 / 5100 User Guide 37
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
Select server IP type for server IP setting.
1. Static IP: If you know the server IP and port
number
2. DDNS: When connecting the server by DDNS
After selecting the type, press [ENT~] key to enter detailed information. To cancel input,
press [F4 (←) ~] key to exit to upper menu.
3.4.2.1. Server IP settings
Select ◆ [ENT~]  [2. Network]  [2. Server IP]  [1.StaticIP] in the initial screen ◆,
and the following screen appears:
Set the Server IP and Port.
To change the port, move the input highlight to the
server port by pressing the [ENT] key.
▶Initial Setting
Server Port: ‘9870’
The default port value of the authentication server is '9870' for the UNIS server and
'2201' for the Access server. Special care should be taken since if you change this value,
you must change it to the same value in the server program.
After finishing the setting, press [ENT ~] key to apply the changed value, or press [F4
(←) ~] key to exit the parent menu.
3.4.2.2. DDNS
Select ◆ [ENT~]  [2. Network]  [2. Server IP]  [2.DDNS] in the initial screen ◆,
and the following screen appears.