User's Manual

AC-5000 / 5100 User Guide 43
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
3.5.5. Display
Select ◆ [ENT~]  [3. Application]  [5. Display] on the initial screen ◆, and the
following screen appears:
▶Initial setting: Identical with the screen on the left
▶Background image
You can change the background image shown on
the initial screen by pressing the [1] and [2] keys.
Also, you can set the cycle to 5 seconds or longer
to have the background images saved in the
terminal displayed sequentially at every preset
interval (seconds)
But, it is not represented in the order of setting,
rather it is represented from the first
▶ Screen Saver (0,10~1800sec)
If there is no input for a time you set, LCD screen turns off automatically. However, if set to
0 LCD screen always turns on. 10 seconds to 1800 seconds can be set.
The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use
the [F4 (←)] key to cancel input during setting.
3.5.6. RS485 ID settings
▶ Basic setting: Same with the left screen
▶RS485 ID setting
Click [0] ~ [7] key to set ID for RS485
communication. It can be set for the connection
with the external device MCP040.
When the external device is not connected, it is not
operated with any value.
3.6. System
Selecting ‘4. System’ in the main menu causes the following screen to appear: