User's Manual

AC-5000 / 5100 User Guide 44
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
Press the applicable key representing the item to be
changed.
3.6.1. System Setting
Select ◆ [ENT~]  [4. System]  [1. System Setting] in the initial screen ◆, and the
following screen appears:
▶ Initial setting: Identical with the screen on the left
▶ User ID Length
This field sets the length of user ID, which can be changed within the range of 1~9
digits. It must be identical to the length of ID registered in the server program. For
example, the user must set it to 6 if the ID registered in the server program is ‘000075’
- which is 6 digits long.
▶Display Option
When set to '1. None', only the authentication result message is displayed when the
authentication is successful, but when set to '2', the user ID is displayed. If set to ‘3’,
user name, ‘4’, UserKey, ‘5’, User’s statement will be displayed on LCD screen, if the
terminal does not store the corresponding user information, the ID is displayed.
Once the registration is complete, the user can press [ENT] to apply it. Press the [F4
(←)] key to exit to the parent menu.
▶Duress FP Alarm
The default setting is '2. No'. If set to 1, Yes, 12V current is output to "L2" pin when
the registered threat fingerprint is authenticated. This pin will operate when you
connect equipment for emergency situation detection such as siren.
▶Alarm Duration (sec)
Set the time for 12V current output.