User's Manual

AC-5000 / 5100 User Guide 57
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: [phone] / FAX: [phone] E-Mail :[e-mail]
http://www.unioncomm.co.kr
▶Printer
To connect a Slave Reader which uses a card or a fingerprint as a secondary
authentication device. If you would like a Wiegand card reader to be connected, set ‘7’
while SR100 should be ‘8’. If authentication occurred at the Slave Reader, ‘Dummy
Reader’ would be displayed under ‘External Device’ on UNIS when the user looks up log
history. [Mode] indicates an authentication mode of the external device. ‘0’ means that
AC5000’s authentication mode (saved as ‘1’: F1, ‘2’: F2, ‘3’: Access, ‘4’: F3, ‘5’: F4).
▶Lock controller
It is set when the additional device is connected without using lock port of the terminal
for the entrance control. If the lock is directly connected to the terminal, select ‘4.
None’. And if the LC010 is connected, select ‘5.LC’. And if MCP040 is connected,
select ‘MCP’.
▶Connection device setting
It is set when connecting the slave reader using card or fingerprint to the terminal to
use as the supplementary authorization device. Set ‘7’ to connect the Wiegand card
reader, and set ‘8’ to connect the SR100. When the authorization is fulfilled by slave
reader, the ‘Dummy reader’ is represented on the ‘External device’ of UNIS program
when searching the authorization log.
[Mode] represents the authorization mode which will be saved when the authorization
was fulfilled by the external device. If it is set ‘0’, it is authorized with the present
authorization mode of AC5000, and if it is set ‘1’, it is always saved as the set
authorization mode. (Saved as ‘1’: F1, ‘2’: F2, ’3’: Access, ‘4’: F3, and ‘5’: F4).
The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use
the [F4 (←)] key to cancel input during setting.
3.7. 7. Mobile Key Option (AC5100 only)
Select [ENT~]  [5. Terminal]  [F2]->[7.Mobile Key Option] in initial screen ◆, and
the following screen appears.
▶ Default setting: same as left screen
▶Use Mobile Key
Choose whether to use mobile card. If you check the box, you will be able to use your
mobile card.