User's Manual
How to Use
① Touch the keypad or the keybox of Out-Body
② Two random numbers and ‘*’ / ‘#’ will appear
③ Press the two numbers regardless of order
④ The keypad will be activated
⑤ Press the registered Guest PIN code and press # (Door will open)
(Guest PIN code is valid only for single entry, and will be deleted after use.)
Using Card / Key Tag
The door lock can be controlled by cards and key tags which has RF function. Maximum of 10
cards or key tags can be registered.
* Caution *
After entering the registration mode and register new cards or key tags, previously registered
cards or key tags will be deleted. Therefore, please register all at once.
Registration
① Open the battery cover of In-Body
② Press tact S/W ‘B’ for 2 seconds and ‘C’ will appear on the keypad
③ Hold the card or key tag you want to register near the surface of the keypad
④ Alarm will ring as the card or key tag is registered successfully
⑤ Hold more cards or key tags you want to register near the surface of the keypad one by
one.
⑥ The registration mode will be deactivated if no card or key tag is registered within 5
seconds
(In order to delete the registered cards and key tags, enter the registration mode and
register new card or key tag, or Factory Reset the door lock.)
How to Use
① Touch the keypad or the keybox of Out-Body
② Two random numbers and ‘*’ / ‘#’ will appear
③ Hold the card or key tag near the surface of the keypad (door will open)