User's Manual
Additional Function
Factory Reset
Every information will be deleted and turn to default settings, except the Serial Number of the
product.
① Open the battery cover
② Press both tact S/W ‘A’ and ‘B’ together for 5 seconds.
③ Alarm will ring and resetting procedure will be proceeded
④ All the functions User has registered will be deleted. (PIN code will be set to 0000)
LED Status
① Red
: Malfunction / Authentication Failure / Duplicate Registration / Rectification / Force Entry
② Green
: Authentication Succeeded / Registration Standby / Authentication Standby / Unlocked
③ Orange
: Low-Battery Warning
Battery Replacement
Low-Battery alarm will ring
- It is time to replace the batteries if the orange LED turn on with alarm when you open
the door with PIN code or RFID card.
Replacing the Battery
- Replace all the old batteries with new ones within a week after the initial warning alarm.