User's Guide

UBio-X Face User Guide 20
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: [phone], Fax: [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
▶Administrator authentication
If you enter the administrator ID, the administrator
authentication
is fulfilled along with the
authentication method of the administrator such as
card, fingerprint, face, or password.
The administrator authentication only appears when
the registered administrator exists. The
authentication is fulfilled only once when entering
the menu mode and you can access to all the menu
until you quit the main menu.
<Fig. 3-2>
3.1.3. How to enter the menu without administrator authentication
It is how to enter the menu when the fingerprint or face authentication is impossible
because the administrator card registered in the terminal was lost or there is no
administrator.
① Open the cover by removing the bracket at the backside of the terminal
② With the opened cover, connect the 5pin connector number 1 with 3, and 2 with 4 at
the bottom of the backside of the terminal.
③ Click the icon
at the basic window to enter the administrator authentication
window in <Fig. 3-2>, and fill the administrator ID with ‘0’ and click [
] button,
then you can enter the menu window.
▶Be sure to remove the connection pin of the connector after modifying the setting
value.
3.1.4. How to save the set values
If you click the [Complete] button at each menu to save the changed value after the
change of settings, the set value of the window is saved and the following message box
appears.
Input Admin ID
Admin ID