User's Guide

UBio-X Pro User Guide 15
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
 Face authorization method
You can select two modes as the face authorization method.
- Normal mode: When the user gets close within 1.5m, the tilting function of the
camera is operated by recognizing the face of user. When the user is within
50~70cm, the face authorization is fulfilled.
- Fixed mode: It has the fastest authorization speed, but because it does not include
the tilting function, please locate the user face at the LCD guideline by maintaining
the distance between the terminal and user in 50 cm.
 Notes
- It is recommended to register and authorize at the location where the terminal is
installed.
- If you pose differently with the registered face, the recognition rate of face can
decrease. It is good to locate the full face as much as possible
- The thick glasses frame or sun-glasses can decrease the recognition rate of face
 Cautions in the installation
- Be sure to install the terminal indoor.
- Do not install under the light bulb.
- Not recommended in the circumstance of backlight or direct light.
1.7. Proper fingerprint registration and input methods
 Correct fingerprint registration methods
Place your index finger on the window just as you do with a finger stamp.
Do not use the tip of the finger.
Make sure the center of your finger touches the window.
(Please be cautious that you may result in low temperature burns when inserting
finger.)
 Use your index finger if possible, it is the easiest for orientation and
guarantees a stable input method. Using the thumb or baby finger can be
awkward and may result in a bad image.