User's Guide

UBio-X Pro User Guide 47
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
registered in the terminal.
[Server Only] : It only authorizes the user
registered in the server.
[Terminal/Server] : It authorizes the user
registered in the terminal as 1:N identification but it
authorizes the user in the server as 1:1 verification.
[Server/Terminal] : 서It authorizes the user
registered in server as 1:N identification but if the
network between server to terminal was
disconnected, it authorizes the user registered in
terminal as 1:N identification.
▶Mandatory Registration
It determines the items which should be entered in the user registration, and the user
can be registered when all the checked items are entered. The number of registered
fingerprints is only valid when the [Fingerprint] is checked.
Click [OK] button to apply the set value, and click [BACK] button to cancel and return.
If you click the OK button without changing the set value, it is moved to the upper
menu directly. Click the menu button at the left side to set additionally.
3.6.2. Finger
The following screen appears if you select the [System]->[Finger] in the main menu..
▶Basic setting : Same with the window at the left side
▶1:N Level (3~9)
It is the authorization level used in the 1:N
Fingerprint authorization. In case of 1:N
authorization, the authorization level is not set for
each user, so the authorization level of the terminal is
always the standard..
▶1:1 Level (1~9)
It is the authorization level used in the 1:1 Fingerprint
authorization. But, in case of the user whose 1:1
authorization level is not set ‘0’ (using the
authorization level of the terminal), it follows the 1:1
authorization level of the user.
▶Fake Finger Detection
It sets the LFD level to prevent the fake fingerprint input. The higher level of the LFD