UBio-X Pro2 User Guide Version Eng-1.0 Copyright 2000 By UNIONCOMMUNITY Co., LTD.
UBio-X Pro2 User Guide Version Date Description 1.00 2020-04-17 Initial Release Firmware Version UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Pro2 User Guide 3 ⚫ Admin, Administrator - A user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended to register at least one administrator.
UBio-X Pro2 User Guide Table of Contents .................................................................................................... 2 ................................................................................................................ 3 Table of Contents .................................................................................................... 4 1. Before use .....................................................................................
UBio-X Pro2 User Guide 5 3.6.1. System ......................................................................................................... 48 3.6.2. Finger ........................................................................................................... 49 3.6.3. Face ............................................................................................................. 51 3.6.4. Auth ....................................................................................................
UBio-X Pro2 User Guide 1. Before use 1.1. Safety Precautions ⚫ Warning Handling with wet hands or allowing liquid to flow into it is prohibited. -> It may cause an electric shock or damage. Do not place a fire source near the terminal. -> It may cause a fire. Do not disassemble, repair, or modify the terminal at discretion. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage.
UBio-X Pro2 User Guide 1.2. Specific names of the terminal Microphone Illumination Sensor Fingerprint Sensor Touch LCD Card Sensing Area IR LED Dual Camera SD Card Input Speaker UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Pro2 User Guide 1.3. Windows after operation ① Icon for Wi-Fi status ② ② Icon for motion detection ③ ③ Warning icon for Fire alarm ④ ④ Warning icon for tamper switch ⑤ ⑤ Icon for door status ⑥ Icon for network status Menu button Time & Date Camera video display ID input button Function keys 1.3.1. Icon None : There is no connected Wi-Fi dongle.
UBio-X Pro2 User Guide : Fire Alarm is activated. (on connecting Fire detection sensor) ③ Fire Alarm ④ Tamper Switch None : Normal status : Tamper switch is activated. (Terminal is disassembled.) : Door status is not sensed. ⑤ Door Status : Door is closed. : Door is opened. : Door is opened abnormally : LAN cable is not connected. ⑥ Network status : Disconnected to the server even if LAN cable is connected. : Connected to the server. (Online) 1.3.2.
UBio-X Pro2 User Guide - When authentication is failed - When unregistered user ID is entered - When unregistered card is entered - Passback error when using anti-passback function - When using for meal management When a user tried the authentication more than twice in one meal time when using as meal management UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide - When the server does not respond during authentication attempt to the server - When the network is disconnected during authentication attempt to the server the the - Registration without authentication right or authentication attempt when the entrance is not permitted - When the user is designated in the blacklist - When the terminal is set locked - When it is not the meal time when set in the meal personnel management UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide - The waiting status for the input of user ID - The waiting status for the input of password - The waiting status for the input of fingerprint Place finger on sensor UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Pro2 User Guide - The waiting status for the input of card Verify Card Place your card - When the terminal program is being upgraded (In this state, you should not turn off the terminal) Upgrading... Do not power off ! 1.4. Voice sounds in operation Operation type Voice sound Success to authorize You are authorized. Fail to authorize Please try again. 1.5.
UBio-X Pro2 User Guide ⚫ 14 Face authentication method Just stare at the camera from the front. ⚫ Notes - It is recommended to register and authorize at the location where the terminal is installed. - If you pose differently with the registered face, the recognition rate of face can decrease. It is good to locate the full face as much as possible - The thick glasses frame or sun-glasses can decrease the recognition rate of face ⚫ Cautions in the installation - Be sure to install the terminal indoor.
UBio-X Pro2 User Guide ⚫ 15 Be aware of certain fingerprint conditions Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause an inconvenience. ➢ If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use a password instead in this case. ➢ When a finger is dry, breathe on the finger for smooth operation. ➢ For kids, it may be tricky or impossible to use the terminal because their fingerprints are too small or very unclear.
UBio-X Pro2 User Guide 2. Product introduction 2.1. Product characteristics ⚫ Multi-Modal product with which the user can use both face and fingerprint authentication functions together. ⚫ Walk-through product and face authentication is possible by passing and staring at the camera. ⚫ FHD(2M) Display resolution is adapted. ⚫ Live detection feature with Dual Camera (Color & IR) ⚫ RF(125kHz) and Smart Card(13.56MHz) can be used at the same time.
UBio-X Pro2 User Guide Card & Password Card, password registration Password authentication after card authentication ID input > Card authentication > Password authentication Fingerprint or Password Fingerprint, password registration Fingerprint authentication Fingerprint authentication after ID input, if failed, password authentication is possible.
UBio-X Pro2 User Guide authentication Fingerprint & Face & Password Fingerprint, face, password registration Face and password authentication after fingerprint authentication ID input > Fingerprint authentication > Face and password authentication UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Pro2 User Guide 2.2. Product components 2.2.1. Standalone use (Access) DC15V Adapter Electric lock (Lock+, Lock-, Monitor) 2.2.2. Connected with Server (Access, Attendance, Meal management) TCP/IP TCP/IP TCP/IP Internet / WAN / LAN TCP/IP Fingerprint authentication server (static IP) UDB server database (MDB or MSSQL) ) Remote management program (user and terminal setting management) TCP/IP Meal management program in cafeteria TCP/IP Attendance management program UNIONCOMMUNITY Co.
UBio-X Pro2 User Guide 2.3. Product specification Types SPEC CPU 1GHz Quad Core CPU LCD 5.
UBio-X Pro2 User Guide SIZE 88.0mm * 175.0mm * 43.4mm 3. Environment setting 3.1. Checks before setting the environment 3.1.1. Entering the menu If you click the [ follows. ] icon at the basic window, you can enter the main menu window as You can enter the subdivision menu by clicking each button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.
UBio-X Pro2 User Guide 3.1.2. Administrator authentication If the administrator is registered, the following administrator authentication window appears first. Admin ID Input Admin ID ▶Administrator authentication If you enter the administrator ID, the administrator authentication is fulfilled along with the authentication method of the administrator such as card, fingerprint, face, or password. The administrator authentication only appears when the registered administrator exists.
UBio-X Pro2 User Guide 23 ③ Click the icon at the basic window to enter the administrator authentication window in , and fill the administrator ID with ‘0’ and click [ then you can enter the menu window. ] button, ▶Be sure to remove the connection pin of the connector after modifying the setting value. 3.1.4.
UBio-X Pro2 User Guide 3.2. Menu composition 1.User 1. 2. 3. 4. 5. 2. Network IP address Static IP / DHCP ▶IP address ▶Subnet Mask ▶Gateway DNS ▶DNS server 1 ▶DNS server 2 Server IP ▶Server IP ▶Port Terminal ID ▶Terminal ID 1. Application ▶Access / TnA / Meal 1. When setting ‘Access’ or ‘TnA’ ▶Schedule F1 (Attend) time F2 (Leave) time F3 (Out) time F4 (In) time Access time ▶Blocking Time (0~86400) 2.
UBio-X Pro2 User Guide □ Fingerprint □ Card □ Password □ Name Number of Fingers [1~10] 5. Terminal 2. Finger ▶1:N Level [3~9] ▶1:1 Level [1~9] ▶Fake Finger Detection ▶FP template format □ Check similar FP □ Multi FP □ Enable 1:N 3. Face ▶Matching Level [1~4] 4. Auth ▶Auth Type 5. Date/Time ▶Time synchronization ▶Display Format ▶Set Date ▶Set Time 6. Database 1. 2. 3. 4. 5. 1. Sound ▶Voice Volume ▶Beep Volume ▶Sound Option 2.
UBio-X Pro2 User Guide ▶RS485 ▶Wiegand Site Code Wiegand Output Wiegand Input 6. Display 1. Theme ▶Background 2. Camera ▶Display Option ▶Save Option □ Save success log □ Save failed log 3. Language ▶Language 4. Option ▶Power saving mode ▶Display Option ▶Touch Calibration 5. Message display ▶Message Display time Time (ms) 7. Info 8. SD Card 1. System ▶System Info ▶Disk ▶Ram 2. Terminal ▶Terminal Info Terminal ID Application Language 3. Network ▶Network Info MAC IP 4.
UBio-X Pro2 User Guide 3.3. User Management When you select the [User] at the main menu, the following window appears. The number of all the users is shown at the top of screen including administrator. Click [Add] button to add the new user, [Modify] button to modify the user, [Delete] button to delete the specific user, [Delete All] button to delete all the users, and [View] button to inquire the registered user list. 3.3.1.
UBio-X Pro2 User Guide The icons in the left side mean as follows : The number of registered faces : The number of registered fingerprints (X,1~10) : Existence of password registration (X: none, O: registered) : The number of registered cards (X,1~10) : User ID to be registered user.
UBio-X Pro2 User Guide 3.3.1.1. Photo registration Register by clicking [ screen. ] button at the [Add User] Click the [Save] button to register with the present camera image. Click [Cancel] or [Back] registration and return. button to cancel the 3.3.1.2. Name registration Register by clicking [Name] button in the [Add User] screen. After entering name with the keyboard at the bottom, click [OK] button. Click the [ ] button to cancel the registration and return. UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide 3.3.1.3. Fingerprint registration ① Register by clicking [Fingerprint] button at the [Add User] screen. Click [ ] button to cancel the registration and return. Choose the finger to be registered when the left screen appears. ※ If you register the multiple fingers, the fingers already registered are represented by blue circle ( ). And if the duress fingerprints are represented by violet circle ( ).
UBio-X Pro2 User Guide ② Enter the fingerprint with referring ‘1.7 Proper fingerprint registration and input methods’. Enter the fingerprint twice according to the screen instruction as follows. When the light is turned on at the fingerprint sensor with the message ‘Register FP’, put your finger on the input screen and wait for 2~3 seconds until the light is turned off. ③ When the message ‘Enter the same fingerprint again’ appears, enter the same fingerprint again.
UBio-X Pro2 User Guide If it is similar with the fingerprint already registered, the message “Already registered finger!” appears like the left side, and you can start again from the procedure of ② if you click the [Retry] button. You can click [ ] button to cancel and return to the upper menu. ※ You can register 10 fingerprints at most for one ID, and you cannot register more than 10 IDs.
UBio-X Pro2 User Guide 3.3.1.4. Face registration Register with referring ‘1.6. How to register and authorize the face properly’. ① As shown on the left screen, align the red guide that recognizes the face with the center of blue outline and register. ② Press the [Start] button to register the face. As soon as the number on the screen is displayed as 0, the face is registered, so please be caution not to blink the eyes at this moment. UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide ③ When the registration is ended, ‘Completed’ message is shown on the screen. If you click [OK] button, the face registration is completed and the screen is moved to the previous screen. If you want to register again, click [Start] button to start from the procedure of ②.
UBio-X Pro2 User Guide 3.3.1.6. Card registration Register with clicking [Card] button in the [Add User] button. Click [ ] button to cancel and return. ※If you entered the card already registered, the following message appears. ※If a user tried over than 10 registrations, the following message appears. 3.3.1.7.
UBio-X Pro2 User Guide 3.3.1.8. Auth type Set by clicking [Auth type] at the [Add User] window. (But, it can be set when there are more than 2 authentication methods registered) Click [Back] button to cancel and return. . This shows all the authentication methods already registered, and the buttons at the lower side shows the buttons [OR] / [AND] which can be selected. Present authentication method is distinguished with blue color as different as gray color is not selected.
UBio-X Pro2 User Guide When you clicked the [Save] button, the case registration was failed Failed! : The case none of authentication methods such as fingerprint, face, card, and password is registered. When you clicked the [Auth method] button, the case none of the authentication method was registered. Auth method is not registered In [Register FP], the case you input the different fingerprint at the fingerprint registration. UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide In [Register FP], the case you tried to registered the fingerprint already registered. (But, you can input the same fingerprint with the same user ID). ※ If you want to register the same fingerprint in the different ID, you should uncheck the ‘System → Fingerprint recognition → preventing the similar fingerprint registration’. But, in this case, because the same fingerprint can be authorized as different ID, it is not suitable for the attendance management. 3.3.2.
UBio-X Pro2 User Guide The followings are LCD guidance which can appear at the deletion procedure. When it is deleted normally. Deleted! When unregistered ID was entered Unregistered! 3.3.3. Modify The following window appears if you click the [User] → [Modification] in the main menu. Input the user ID to be modified and click [OK] button. Click [Back] button to cancel and return.
UBio-X Pro2 User Guide The icons at the left side means as follows. : The number of registered faces : The number of registered fingerprints (X,1~10) : Existence of password registration (1: Registered / X: Not registered) : The number of registered cards (X,1~10) : User ID to be registered : User : Administrator If you touch the picture, you can register with re-taken picture The modification method of each item is the same with the user addition, so refer to the ‘3.3.1. Add’. 3.3.4.
UBio-X Pro2 User Guide 3.3.5. View If you click the [User] -> [View] in the main menu, all the users registered can be searched as follows. The user list appears by the order of ID, and if you slide the screen upward, you can search the additional user list. The list appears in the unit of 100 people and if the list is more than 100 people, you can see the previous or next list by clicking [Back] or [NEXT] button.
UBio-X Pro2 User Guide ▶[Name]: If you input the user name by clicking [Name] button, the registered user list including the characters is shown. If you click [Back] button in this window, you can move to the ‘3.3. User management’ menu. 3.4. Network setting If you select [Network] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side.
UBio-X Pro2 User Guide ▶[Terminal ID]: It is unique ID used by the terminal to distinguish the terminals and the default value is ‘1’. It should be the same with the ID of the terminal registered, and the characters can be up to 9 digits. If you touch the item you want to change, the keypad appears at the bottom. If the input is finished with the keypad, continue the input by touching [ ] button or the next input window.
UBio-X Pro2 User Guide When the check box [Wireless Enabled] was checked, the AP list around will be scanned automatically as like the left picture. Selecting the AP name from the AP list, the AP password will be asked and then UBio-X Pro2 device will be connected to this AP when inputting the proper AP password. If you want to apply the changes, click [Close] button, and return to the previous menu by clicking [Back] button. UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide 3.5. Application mode 3.5.1. Application If you select the [Application] in the main menu, the following window appears. In the application mode, you can select the [Access / TnA / Meal] according to the purpose. 3.5.1.1. Access or TnA setting It is the screen appearing when you select the Access. Click [OK] button to apply the changes, and click [Back] button to cancel and return. ▶Basic setting : Same with the window at the left side.
UBio-X Pro2 User Guide ▶Schedule (00:00~23:59): You can set the time for each authentication mode and if you do not need the function, set ’00:00-00:00’. During the set time, the set mode is always shown unless clicking another function button, and it is convenient for the TnA management because the indication mode is changed to the set authentication mode automatically though another mode was authorized by clicking another function key.
UBio-X Pro2 User Guide 3.5.2. Function key The following window appears if you select the [Application] → [Function key] in the main menu. ▶Basic setting: Same with the window at the left side. ▶Fn key It means the [F1] ~ [F4], Access button used to change the authentication mode such as attendance and leaving, and if you click the Fn key, the authentication mode is changed to the mode.
UBio-X Pro2 User Guide 3.6.1. System The following window appears if you select the [System] → [System] in the main menu. ▶Basic setting: Same with the window at the left side ▶User ID Length It sets the length of the user ID, and it can be 2~9 characters and should be the same with the length of the registered ID of the server program. If the ID registered in the server program uses ‘000075’ as a 6 digits ID, set 6.
UBio-X Pro2 User Guide 3.6.2. Finger The following screen appears if you select the [System] -> [Finger] in the main menu. ▶Basic setting: Same with the window at the left side ▶1:N Level (3~9) It is the authentication level used in the 1:N Fingerprint authentication. In case of 1:N authentication, the authentication level is not set for each user, so the authentication level of the terminal is always the standard.
UBio-X Pro2 User Guide If you click the [OK] button, the new format is applied, and if you click the [Cancel] button, the format value before the change is maintained. ※ Notes If you change the fingerprint template format, all the registered fingerprints are deleted, so be cautions. ▶Check similar FP If it is checked ( ), the re-recognition as another user ID is prevented by checking if the fingerprint is already registered. Similar fingerprints are checked against users who ticked the 1:N option.
UBio-X Pro2 User Guide 3.6.3. Face ▶Basic setting: Same with the window at the left side ▶Matching level It is the level used in face authentication, and it can be set 1~4 levels according to the accordance degree with the registered face. And the authentication is successful when the accordance degree is higher than set authentication level.
UBio-X Pro2 User Guide 3.6.4. Auth If you select the [System] → [Auth] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side ▶Auth Type: Select the authentication method of the terminal. - Card: Though the user is registered with the authentication method requiring the face, fingerprint, or password in addition to the card, the terminal with the checking of the item, the card can authorize by itself.
UBio-X Pro2 User Guide 3.6.5. Date/Time If you select the [System] → [Date/Time] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side ▶Time synchronization It determines the synchronization method between the present time of terminal and server. If you want automatic synchronization, set [Auto], and if you want manual synchronization, set [Manual]. .
UBio-X Pro2 User Guide 3.6.6. Database If you select the [System] → [Database] in the main menu, the following window appears. If you want to delete all the users, click [Delete all users] button. If you want to initialize the settings, click [Delete setting] button. If you want to initialize the authentication record, click [Delete Log] button. If you want to delete image log only, click [Delete image log] button.
UBio-X Pro2 User Guide 3.6.6.2. Delete setting If you select the [System] → [Database] → [Delete setting] in the main menu, the following screen appears. Click [YES] button to initialize all the set values, and click [NO] or [ ] button to cancel. If there is no signal for 5 seconds in this state, the message box disappears without initialization. If the deletion is successful by clicking [YES], the success message in
UBio-X Pro2 User Guide 3.6.6.4. Delete image log If you select the [System] → [Database] → [Delete image log] in the main menu, the following window appears. If you want to delete all the authentication record in the terminal, click [YES] button, and if you want to cancel, click the [NO] or [ ] button. If there is no signal for five seconds in this state, the message box disappears without deletion. If it is deleted successfully by clicking [YES], the success message in [Fig. 3-5] is displayed.
UBio-X Pro2 User Guide 3.7. Terminal 3.7.1. Sound If you select the [Terminal] → [Sound] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Voice volume Scroll from side to side in 0~15 degrees to set the voice volume. If you click the [ ] button at the right side, the voice is played to check the volume. ▶Beep volume Scroll from side to side in 0~3 degrees to set the beep volume.
UBio-X Pro2 User Guide 3.7.2. Option If you select the [Terminal] → [Option] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Read Card number: If the user put the card on the screen, the card number is displayed on the LCD. You can change the [Card format] to check the card number according to the set value. ▶Lock terminal: This function enables the administrator to lock or unlock the terminal directly on the terminal, not on the server program.
UBio-X Pro2 User Guide byte 10 Digit Decimal 1386022627 hexadecimal 529D06E3: 10 digits decimal 3,5 Digit Decimal 3808861522 hexadecimal E3069D52: 10 digits decimal 6 Digit Hexadecimal 069D52 Locate the foremost 3bytes backwards. Click [OK] button to apply the set value, and click [Back] button to cancel and return. 3.7.3. Input If you select the [Terminal] → [Input] in the main menu, the following window appears. ▶Basic setting : Same with the window at the left side.
UBio-X Pro2 User Guide ▶M1/M2: Set when connecting the external access point to DM1/DM2 (When using motor lock, set [Lock NO] or [Lock NC].) - None: When nothing is connected. - Lock NO or Lock NC: When the lock monitoring pin was connected. - Fire detection NO or Fire detection NC: When the fire detection sensor is connected. - Panic detection NO or panic detection NC’: When the panic situation detection sensor is connected.
UBio-X Pro2 User Guide 3.7.4. Lock If you select the [Terminal]->[Lock] in the main menu, the following windows appears. ▶Basic setting: Same with the window at the left side. ▶Lock 1 Option - None: When it is not used - Strike/Auto/OK: When the warning light is connected to indicate the strike type, auto door, or authentication success/failure on Lock1. - Motor lock 1: When the motor lock is connected.
UBio-X Pro2 User Guide Click [OK] button to apply the set value, and click [Back] button to cancel and return. Because it is set in ms unit, if you want to set 3 seconds, you should set 3000. 3.7.5. External Device If you select the [Terminal] → [External device] in the main menu, the following window appears.
UBio-X Pro2 User Guide 63 ▶Wiegand Output It is used only when the special controller is equipped running by the Wiegand input. When the authentication is finished, the data of the following format is sent to the Wiegand port of the terminal. None General case. It does not use Wiegand out port. 26bit Because it sends “Site code [1byte] + User ID [2 bytes]”, set the user ID less or equal than 4 digits.
UBio-X Pro2 User Guide 3.8. Display 3.8.1. Theme If you select [Display] → [Theme] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Background Since the camera is basically displayed, it is not available to select the background. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.
UBio-X Pro2 User Guide 3.8.2. Camera If you select the [Display] → [Camera] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Display Option Select the image displayed in the message window of authentication success - None - Registered photo - Authentication method: Image stands for each authentication method ▶Save success log If it is checked ( ), the camera image is captured as image log when the authentication was successful.
UBio-X Pro2 User Guide 3.8.3. Language If you select the [Display] → [Language] in the main menu, the following window appears. ▶Basic setting: ‘English’ ▶Language If you change the language and click ‘OK’ button, the voice message and language are changed to the set language. If you want to cancel and move to the upper menu, click [Back] button.
UBio-X Pro2 User Guide 3.8.4. Option If you select [Display] → [Option] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Power saving mode (5sec ~ 10min) If there is no input for set duration, the LCD screen is turned off automatically. But, if you set ‘None’ the LCD is always turned on. ▶Display Option It sets what will be shown at the LCD screen when the authentication is successful.
UBio-X Pro2 User Guide 3.8.5. Message display time If you select the [Display] → [Message display time] in the main menu, the following window appears. ▶Basic setting: Same with the window at the left side. ▶Message Display (ms) It sets the time for which the authentication result window to be displayed. 0~5000 is available for the value, and the authentication result window appeared and disappear for the duration. Because it is set in millisecond, if you want to set 2 seconds, you should set 2000.
UBio-X Pro2 User Guide 3.9. Terminal Info 3.9.1. System If you select the [Terminal info] → [System] in the main menu, the following window appears. ▶System info The hardware and firmware version of terminal is shown. ▶Disk (using size / Total size) It shows the using size of the hard disk. If the using size is high, it is represented in red. ▶Ram (using size / Total size) The using size of RAM among the all size is represented. If the using size is high, it is represented in red...
UBio-X Pro2 User Guide 3.9.2. Terminal If you click the [Terminal info] → [Terminal] in the main menu, the following window appears. ▶Terminal info It represents the option setting value of the terminal. Click [Close] or [BACK] button to finish the inquiry and move to the upper menu. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.
UBio-X Pro2 User Guide 3.9.3. Network If you select the [Terminal info] → [Network] in the main menu, the following window appears. ▶Network info It shows the setting value of the terminal. If you want to finish the inquiry and move to the upper menu, click [CLOSE] or [Back] button. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.
UBio-X Pro2 User Guide 3.9.4. User If you select the [Terminal info]->[User] in the main menu, the following window appears. ▶User - User: The number of users registered (including administrator) - Admin: The number of the administrators registered. - FP: The number of all the fingerprints registered. - FP 1toN: The number of fingerprints which can be authorized by 1:N.
UBio-X Pro2 User Guide 3.9.5. Log If you select the [Terminal info] → [Log] in the main menu, the following window appears. ▶Log Log: The number of logs saved in the terminal Image Log: The number of image logs saved in the terminal. (Max means the maximum number of items which can be saved in each item.) ▶View Log Displays log time and authentication result ▶Log Search To search log, follow the following steps, [Terminal Info] → [Log] → [View Log] → [Log Search].
UBio-X Pro2 User Guide ▶View Log Log search result shows the information such as the date, time, ID and access result (success or failure). Click [BACK] or [NEXT] button to see the search information. If you want to finish the inquiry and move to the upper menu, click [Close] or [BACK] button. 3.9.6. About If you select the [Terminal info] -> [About] in the main menu, the following window appears. ▶About It shows the license information applied in the terminal.
UBio-X Pro2 User Guide 3.10. SD Card If you select the [SD Card] at the main menu, the following screen appears. < When the SD Card was inserted > < When the SD Card was not inserted > < When the SD Card was locked > ※ It works only if the SD Card is inserted, and it should be inserted with the back side face forward like the figure. (The side of the SD Card should not exceed 32G.) UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide It is the feature to back up the data of the terminal via [Export]. You can copy the back-up data to the terminal via [Import]. ▶Export It copies the data from the terminal to the external SD Card. - User data: It copies the user DB to the folder ‘unisuser’ on the SD Card. - System option: The option setting value of the terminal is copied to the folder ‘UbioXpro2 / config’.
UBio-X Pro2 User Guide 77 - Picture: The image log data is saved in the folder ‘UbioXpro2 / Terminal ID (8 digits) / log / pictures’ on the SD Card as jpg file. - Export all: It can export all things User Data, Event Log, and image log to the SD Card. ▶Import It copies the data from the SD Card to the terminal. - User Data: It copies the user DB from the SD Card to the folder ‘unisuser’ in the terminal.
UBio-X Pro2 User Guide 78 3.11. Download the user file If needed, it is the feature that the user can change the voice message. You can download or change it after downloading the user file from UNIS server program. 3.11.1. Change the voice message If you select the ‘Download customized file’ in the UNIS program, the following window appears. If you select ‘Sound file in success (.wav)’ as the file type and click ‘Send’ button after selecting the sound file (.
UBio-X Pro2 User Guide 4. How to use terminal The background image and composition of the basic window can be changed according to the administrator’s setting. In addition, if the administrator set the screen saver time, the LCD screen is turned off automatically if there is no action for set time, and when the user accessed to the terminal, tried the authentication with fingerprint/card, or touched the main screen, the LCD screen is turned on automatically. 4.1.
UBio-X Pro2 User Guide 4.2. How to input user ID If you click the button [ID] on the basic window, following the window “Input User ID” as below. Enter the user ID to be certified and click [OK] button, then the input screen of fingerprint, face, card, or password depending on the authentication method of the user. 4.3. Authentication 4.3.1. Face authentication ▶1:N authentication (Identification) Try authentication by staring at the camera so that the face appears on the LCD screen.
UBio-X Pro2 User Guide → → 4.3.2. Fingerprint authentication ▶1:N Authentication (Identification) If you put your fingerprint on the fingerprint sensor at the basic window, the fingerprint is entered with the light on the sensor with beeping. Do not take off your finger until the light of the sensor turns off completely.
UBio-X Pro2 User Guide → → 4.3.3. Card authentication Place the card on the card picture . 4.3.4. Password authentication Input your ID by clicking [ID input] button as follows and input password when the password input window appears. → → UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code: 05836) Tel: +82-2-6488-3000, Fax: +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Pro2 User Guide 83 4.3.5. Multi-mode authentication For user who needs to authenticate via more than 2 methods such as –card & fingerprint OR card & fingerprint & face, the preferential precedence of the authentication after the ID is typed is as follows: card→fingerprint→face→password in order. This type is activated even if face or fingerprint authenticates firstly. UNIONCOMMUNITY Co., Ltd.
UBio-X Pro2 User Guide 84 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
UBio-X Pro2 User Guide 85 “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibilityof exceeding the FCC radio frequency exposure limit. Contains FCC ID: 2AEEY-PBLN51822M UNIONCOMMUNITY Co., Ltd.
