User's Guide

UBio-X Pro2 User Guide 14
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code: 05836)
Tel: [phone], Fax: [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
⚫ Face authentication method
Just stare at the camera from the front.
⚫ Notes
- It is recommended to register and authorize at the location where the terminal is
installed.
- If you pose differently with the registered face, the recognition rate of face can
decrease. It is good to locate the full face as much as possible
- The thick glasses frame or sun-glasses can decrease the recognition rate of face
⚫ Cautions in the installation
- Be sure to install the terminal indoor.
- Do not install under the light bulb.
- Not recommended in the circumstance of backlight or direct light.
1.7. Proper fingerprint registration and input methods
⚫ Correct fingerprint registration methods
Place your index finger on the window just as you do with a finger stamp.
Do not use the tip of the finger.
Make sure the center of your finger touches the window.
(Please be cautious that you may result in low temperature burns when inserting
finger.)
⚫ Use your index finger if possible, it is the easiest for orientation and guarantees a
stable input method. Using the thumb or baby finger can be awkward and may result
in a bad image.
⚫ Check if your fingerprint is unclear or damaged.
It is tricky to recognize fingerprints on dry, wet, unclear, or injured fingers. Use
another finger in this case.