User's Guide

UBio-X Slim User Guide 29
UNIONCOMMUNITY Co., Ltd.
Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu,
Seoul, Korea (zip code : 05836)
Tel : [phone] , Fax : [phone],
E-Mail :[e-mail]; http://www.unioncomm.co.kr
It should be inserted for IP address of the Server PC which is
installed the Server software.
Port Number
It should be inserted for the communication port number
between server to terminal.
Ping Period
It decides the polling duration to check the communication
status between server to terminal. It is given from 2 to 20.
(Default : 10 seconds)
3.6.2. TCP/IP
The options on [TCP/IP] should be configured properly to
connect to the server after selecting ‘Network mode’.
DHCP
It is decided when selecting ‘Use’ between ‘Use’ and ‘Not Use’.
When using ‘DHCP’, the terminal IP address cannot be
changed. Because it obtains automatically.
When not using ‘DHCP’, ‘IP Address’, ‘Subnet Mask’ and
‘Default Gateway’ for terminal should be given manually.
To obtain them, contact the network administrator on the
customer site.
What is DHCP (
Dynamic Host Configuration Protocol)
?
This feature is to assign automatically the IP address of the terminal
including Subnet Mask and Gateway by DHCP Server to use TCP/IP
communication. So if it is “On”, it makes to use more convenient.