VIRDI 4000 TM User’s Manual Version eng-1.02 Copyright 2006 By UNION COMMUNITY Co., Ltd.
VIRDI 4000 TM User’s Manual 2 Disclaimer Information in this document is provided in connection with UNION COMMUNITY products. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document.
VIRDI 4000 TM User’s Manual 3 sensor and in-house one-stop processing capability regarding hardware, software, product design, etc., our services to government sector and various commercial sectors like security, construction and enterprise are in full swing through fast problem-solving approach to meet market trends or demands. As a result, UNION COMMUNITY exports its market-proven fingerprint products to over 40 countries including Japan, USA, Europe and China.
VIRDI 4000 TM User’s Manual 4 < Glossary> Admin, Administrator - A user who can enter into the terminal menu mode. They can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended you register at least one administrator.
VIRDI 4000 TM User’s Manual 5 Function keys [F1], [F2], [F3], [F4], [ENTER] are used, and are for direct authentication. Each key represents each authentication mode. UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 4000 TM User’s Manual 6 Table of Contents < Glossary> ............................................................................................................... 4 Table of Contents ..................................................................................................... 6 1.1. Safety Precautions ...................................................................................... 8 1.3. Screen (during operation) Description .................................................... 10 1.
VIRDI 4000 TM User’s Manual 7 4.2.1. Authentication mode ........................................................................... 57 4.2.2. [1:1] fingerprint authentication ............................................................ 58 4.2.3. [1:N] fingerprint authentication............................................................ 58 4.2.4. Password authentication .................................................................... 58 4.2.5. Card authentication .....................................
VIRDI 4000 TM User’s Manual 8 1. Before use 1.1. Safety Precautions Warnings Handling with wet hands or allowing liquid to flow into it is prohibited. -> It may cause an electric shock or damage. Do not place a fire source near the terminal. -> It may cause a fire. Do not disassemble, repair, or modify the terminal at your discretion. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage.
VIRDI 4000 TM User’s Manual 9 1.2. Terminal Description ④ ⑤ ⑥ ① ⑦ ② ⑧ ⑨ ③ No. item LCD [F1], [F2], [F3], [F4] [1] ~ [9] [0] ① ② Key Pad [*] [#] ③ Enter, Call [ENTER] ④ [CALL] Microphone ⑤ LED Lamp ⑥ Fingerprint Input Window ⑦ IRED Sensor ⑧ ⑨ Card Input Area Speaker description Display messages for all the operations. [F1] : Start, [F2] : Leave, [F3] : Outside Work, [F4] : Return Input digits (1~9). Enter ‘0’ or LCD menu scroll.
VIRDI 4000 TM User’s Manual 10 1.3. Screen (during operation) Description == Connected to network server Disconnected from network server Access mode display for access control (F1, F2, F3, F4). T&A mode display for time & attendance control (START, LEAVE, OUT, BACK, NORMAL). == START 00:00 Current Time Information Message == 00:00 == 00:00 == 00:00 == 00:00 == 00:00 == 00:00 == 00:00 == 00:00 == 00:00 00:00 - Initial screen. - Waiting for a user’s ID to be input.
VIRDI 4000 TM User’s Manual 11 == 00:00 - A registered user tried authentication at a time when access is not allowed. == 00:00 - Waiting for authentication. == 00:00 == 00:00 a reply from the server for - Terminal is locked. - It is not a mealtime - when in meal control mode. - Terminal program is in upgrade mode. (power must not be turned off while this message is displayed). 1.4.
VIRDI 4000 TM User’s Manual 12 1.7. Correct fingerprint registration and input methods Correct fingerprint registration method Place your index finger on the window just as you would with a finger stamp. Touching with a fingertip is not an appropriate registration or input method. Make sure the centre of your finger touches the window. Use your index finger, if possible. The index finger guarantees an accurate and stable fingerprint input. Check if your fingerprint is clear and undamaged.
VIRDI 4000 TM User’s Manual 13 For kids, it may be tricky or impossible to use the terminal because their fingerprints are too small or undeveloped. It is recommended you register their fingerprints every six months. For the elderly, it may not be possible to register their fingerprints if there are too many fine lines on the fingerprints. If fingerprints are very unclear, it’s more convenient to register 2~3 fingerprints. It is recommended you register more than 2 fingerprints.
VIRDI 4000 TM User’s Manual 14 2. Introduction 2.1. Features Access control system using LAN - Communication between the unit and authentication server is done via a UTP cable and TCP/IP protocol, so an existing LAN can be used as it is. It guarantees network-based administration and monitoring as well as easy expansion, high reliability, and higher speed. Convenient Auto Sensing function - Simple authentication process without any key input; simple fingerprint touching is sufficient.
VIRDI 4000 TM User’s Manual 15 Enhanced security with detection of fake fingerprints - Adopted detection technology of fake finger enhances security levels. Various registration and authentication methods - There are a total of 11 registration and authentication methods (4 methods if the card reader is not installed). You are required to select one method before registering users and an administrator. FP Fingerprint registration. Fingerprint authentication. ID&PW Password registration.
VIRDI 4000 TM User’s Manual 16 2.2. Configuration 2.2.1. Network configuration Network Server (authentication server) UTP UTP UTP Switch Hub LET 36 UTP 6410 Tx Rx 641 2 Tx Rx 1 Tx Rx UTP 1 2 Tx Rx 1 3 Tx Rx 2 4 Tx Rx 1 Tx Rx 2 Tx Rx 1 2 1 2 3 6423 1 2 2 1 643 8 2 3 4 5 6 7 641 0 8 9 10 11 12 2 2 3 4 643 7 5 6 2 Tx Rx 1 1 2 Tx 3 Rx 2 4 5 7 6 8 9 10 11 12 1 3 4 WAN UTP UTP TCP/IP 2.2.2.
VIRDI 4000 TM User’s Manual 17 2.3. Specification Item Specification CPU 32-Bit RISC CPU Remarks 8M SDRAM Memory 4M Flash (Default) 8M Flash (Option) Fingerprint Sensor Optical Authentication Speed <1 second Scan Area / Resolution 12.9 * 15.2mm / 500 DPI FRR / FAR 0.1% / 0.
VIRDI 4000 TM User’s Manual 18 3. Device Configuration Settings 3.1. Check items before device configuration settings. 3.1.1. Entering menu The following screen appears when [*] is pressed and held for over 2 seconds. 1. User 2. Network 3. Option 4. Terminal Info 5. Ext Function 6. Device Press [0] to view menus not shown in the LCD window. Press a numeric key to move to a submenu. The following administrator authentication allows for entry into submenu.
VIRDI 4000 TM User’s Manual 19 3.1.3. Saving device configuration settings Press the [#] button in the main menu to save device configuration settings. The following screen appears: Save? [Y=1/N=2]:_ Press [1] to save changes. If not, press [2]. If there are no changes in device configuration settings, it moves out from this setting mode without displaying the above screen.
VIRDI 4000 TM User’s Manual 20 3.2. Menu configuration 1. User 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All 2. Network 1) Terminal ID 2) Mode [NS/SN/NO] 3) Network Type [Static IP/DHCP] 4) IP Address 5) Subnet Mask 6) Gateway 7) Server IP 8) Server Port 3. Option 1. Application [Access/Time Attendance] 2. Verify Option 3.
VIRDI 4000 TM User’s Manual 21 4. Terminal Info Terminal ID=0001 Version=10.51.00 Application=Access Language=ENG Mode=NS Network Type= Static(1) Mac-Address=000265201111 IP Address=192.168.0.3 Gateway=192.168.0.1 Subnet Mask=255.255.255.0 Server IP=192.168.0.2 Svr-Port==2201 Card Reader=None FP-Sensor=FOS01 1:1 Level=4 1:N Level=5 Max User=0 MAX FP=0 All User=0 All Admin=0 All FP=0 1:N User=0 1:N FP=0 All Log=0 DipSwitch=000000 5. Ext functions 1. Lock Terminal 2. Read Card No. 3.
VIRDI 4000 TM User’s Manual 22 3.3. User account 3.3.1. User registration Press the [1] button in the main menu to select “1.User”, and the following screen appears: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All Press [1] to register a new user. User ID [NEW] ID : _ _ _ _ Enter a new user ID, and press [ENTER]. If the entered ID already exists, it moves to the upper menu with a “ppibig” sound. If not, selection screen for the following authentication method appears: 1.FP 2.ID&PW 3.FP|PW 4.
VIRDI 4000 TM User’s Manual ( N=0/Y=1 ) : 1 23 The default is ‘0’. To enable 1:N authentication, it should be set to ‘1’. When there are not many users, or for the convenience of a specific user, a fingerprint only without ID can be used for authentication. For authentication without ID, it shall be set to ‘1’. For authentication with ID, it should be set to ‘0’. Press [ENTER] to enter fingerprints.
VIRDI 4000 TM User’s Manual 24 If registration succeeds, a “ppiririck” buzzer sound rings. Then, it returns to the “1.Add” screen. If they are different, a “ppibig” buzzer sound indicates failure rings and the “1.Add” menu screen appears. 3.3.1.3. “3. FP/PW” registration After both fingerprint and password are registered, authentication method is selectable as either fingerprint or password.
VIRDI 4000 TM User’s Manual 25 Card registration (refer to ⑤ “5. RF” registration) precedes fingerprint registration (refer to ① “1. FP” registration). 3.3.1.7. “7. RF&FP” registration After both card and fingerprint are registered, card authentication and fingerprint authentication are needed for access. Card authentication precedes fingerprint authentication. ◆ [*] [1] [1] User ID [ENTER] [7] Place the card 1:1 Level [ENTER] Input FP Input same FP ◆ Card registration (refer to ⑤ “5.
VIRDI 4000 TM User’s Manual 26 input for authentication. Card registration (refer to ⑤ “5. RF” registration) precedes fingerprint registration (refer to ① “1. FP” registration). 3.3.1.11. “93. ID&PW/RF&PW” registration After both card and password are registered, authentication method is selectable as ID and password authentication or card and password authentication.
VIRDI 4000 TM User’s Manual 27 3.3.3. Modifying User ◆ [*] [1] [3] User ID [ENTER] Select changing menu change value In the main menu, press [1] to select “1. User” to see the following screen: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All To Modify a user, press [3]. Input ID [MOD] ID : _ _ _ _ Enter the user’s ID to modify, and press [ENTER]. There is no difference for modifying a general user’s or administrator’s information. 3.3.3.1. “1.
VIRDI 4000 TM User’s Manual 28 This is same as ‘Add FP’ in 3.3.1.1. “1. FP” registration. The same fingerprint must be input twice. If additional fingerprint registration succeeds, a “ppiririck” buzzer sounds. If not, a “ppibig” buzzer sounds and the “1. Add” menu appears. 3.3.3.2. “2.ID&PW” user When a user wants to change their password. 1. Modify PW To modify a password, press [1]. To cancel this operation, press [#]. Press the [1] button to modify the password.
VIRDI 4000 TM User’s Manual 29 3.3.3.4. “5.RF” user 1. Change Card To change the card, press [1]. To cancel, press the [#] button. Press the [1] button to change the card. Place Your Card To cancel, press the [#] button. If a user places the card close to the unit, a “ppiririck” buzzer sounds if the modification is successful and the “1. Add” menu appears. 3.3.3.5. “6.RF/FP”,”7.RF&FP”,”92.ID&FP/RF&FP” user 1. 1:1 Level 2. Add FP 3.
VIRDI 4000 TM User’s Manual 30 3.3.4. Administrator registration ◆ [*] [1] [4] Admin ID [ENTER] ◆ In the main menu, press [1] to select “1.User” and the following screen appears: 1. Add 2. Delete 3. Modify 4. Add Admin 5. Delete All For administrator registration, press [4]. Admin ID [NEW] ID : _ _ _ _ Enter the administrator ID to register and press [ENTER]. ※ The procedures for administrator registration are the same as those for user registration.
VIRDI 4000 TM User’s Manual 31 3.4. Network settings In the main menu, press [2] to select “2.Network” to see the following screen. When this setting is done, press [ENTER] to move to the next setting. 3.4.1. Terminal ID settings ◆ [*] [2] ◆ < Terminal ID > ID : 00000001 This ID is unique for each terminal and used by an authentication server to distinguish each terminal. The default is ‘00000001’. It should be identical to the door ID set in the server program and its length should be 1~8 characters.
VIRDI 4000 TM User’s Manual 32 each mode can be used flexibly. If there are more than 10 terminals connected to the server for simultaneous authentication, or there are frequent network problems, it is recommended to use “SN” authentication (setting ‘1’). Press [ENTER] to move to the next setting. 3.4.3. Connection method settings ◆ [*] [2] [ENTER] [ENTER] ◆ Network Type:0 0:Static 1:DHCP Press [0] for Static IP. Press [1] for DHCP. The default is ‘0’ (Static IP).
VIRDI 4000 TM User’s Manual 33 3.4.6. Gateway settings 192.168. 0. 1 Press [#] to delete an old value and enter the new value. If the gateway IP address is ‘210.98.100.1’, enter as below: [2] [1] [0] [9] [8] [*] [1] [0] [0] [1] Press [ENTER] to move to the next setting. 3.4.7. Server IP settings < Server IP > 192.168. 0. 2 Press [#] to delete an old value and enter the new value. If the server address is “210.98.100.
VIRDI 4000 TM User’s Manual 34 3.5. Option settings 3.5.1. Application mode settings In the main menu, press [3] to select “3. Option” and following screen appears: 1. Application 2. Verify Option 3. Set Doorlock 4. Sound Control 5. Time Setting 6. Other Setting To set the basic operation mode of a terminal, press [1]. ◆ [*] [3] [1] ◆ Application:0 0=Access Ctrl 1=T&A Ctrl The default is ‘0=Access Ctrl’. For Access Control application, set as ‘0’. For Time & Attendance, set as ‘1’.
VIRDI 4000 TM User’s Manual 35 is very convenient when using time & attendance mode. After setting , set and in the same manner. Note that each time must not overlap.
VIRDI 4000 TM User’s Manual 36 3.5.2.1. Settings for ID display when authentication is successful. ◆ [*] [3] [2] ◆ (0-2):0 Default setting: ‘0’ If set to the default setting ‘0’, only the “Success” message is displayed. When set to ‘1’, the user ID is displayed in the LCD window when authentication is successful; as shown below. When set to ‘2’, the user name appears in the LCD window when authentication is successful; as shown below.
VIRDI 4000 TM User’s Manual 37 1:N authentication, only 1:1 authentication is allowed in the terminal if this is set to ‘0’. In cases when ID input or fingerprint authentication after placing a card – when card input replaces ID input – is unavoidably needed, it should be set to ‘0’. The following are detailed settings about whether 1:N authentication is allowed or not.
VIRDI 4000 TM User’s Manual 38 3.5.3. Doorlock settings In the main menu, press [3] to select “3. Option” and the following screen appears: 1. Application 2. Verify Option 3. Set Doorlock 4. Sound Control 5. Time Setting 6. Other Setting Press [3] for door settings. 3.5.3.1. Door opening time settings. ◆ [*] [3] [3] ◆ (00-30):03 Default setting: ‘03’ (unit: sec.) This is used to set the door opening time after authentication is successful.
VIRDI 4000 TM User’s Manual 39 automatic doors and ‘2’ setting is for strike type locks. When set to ‘1’ or ‘2’, the door status, via connected terminal, is periodically transmitted to the server. Once the setting is complete, Press [ENTER] to move to the next setting. 3.5.3.
VIRDI 4000 TM User’s Manual
VIRDI 4000 TM User’s Manual 41 menu. 3.5.6. Other setting In the main menu, press [3] to select “3.Option”. Press [6] to see the following screen: 1. Application 2. Verify Option 3. Set Doorlock 4. Sound Control 5. Time Setting 6. Other Setting Press [6] for other settings. 3.5.6.1. LCD Backlight On/Off settings ◆ [*] [3] [6] ◆ (0=Off/1=On): Default setting : ‘0’ This sets the LCD backlight. If set to ‘1’, the LCD backlight is on all the times.
VIRDI 4000 TM User’s Manual 42 3.6. Terminal information view ◆ [*] [4] ◆ In the main menu, press [4] to select “4.Terminal info” and the following screen appears; where all the environmental settings are displayed: Terminal ID=0001 Ver=10.51.00 Application =Access Language=ENG Mode=SN Press [0] to scroll up and down the screen. ▼ Terminal ID Terminal ID Version Terminal firmware version. Application Terminal application mode (Access/T&A).
VIRDI 4000 TM User’s Manual 43 All FP Number of fingerprints currently registered to a terminal. 1:N User Number of users for 1:N authentication. 1:N FP Number of fingerprints for 1:N authentication. All Log Authentication records stored in a terminal. Dip Switch Dip Switch setting status in a terminal. 3.7. Extra functions In the main menu, press [5] to select “5.Ext function” and the following screen appears: 1. Lock Terminal 2. Read Card No. 3.7.1.
VIRDI 4000 TM User’s Manual 44 using this function, an administrator can read a card number when it is placed on the terminal mounted card reader. This is to register the placed card with the server. When this LCD screen pops up and an administrator places a card on the terminal, the card number shows in the LCD screen. To exit from this setting, press [#] to move to the upper menu. 3.7.3.
VIRDI 4000 TM User’s Manual 45 This is to enable or disable the function keys. ‘O’ means enabling the function key and ‘X’ means disabling the function key. Whenever the number conforming to a function key in this setting is pressed, the setting is changed from ‘O’ to ‘X’. In this setting, 1 is for [F1], 2 is for [F2], 3 is for [F3] and 4 is for [F4].
VIRDI 4000 TM User’s Manual 46 3.8.2.2 Card Reader format setting :0 0= Hexa 8byte 1= Hexa 16byte 2= Decimal Default setting: ‘0’ Set card data format from card reader. - 0: Hexadecimal data, process with 8byte data value. - 1: Hexadecimal data, process with 16byte data value. - 2: Process with Decimal data value. 3.8.3. Fingerprint sensor settings 3.8.3.1.
VIRDI 4000 TM User’s Manual 1:N Level (3-9):5 47 Default setting: ‘5’ This is to set the 1:N authentication security level between the fingerprint captured from the fingerprint input window and all fingerprints in a terminal which are allowed for 1:N authentication. For your information, 1:N authentication level is not set for respective users but only for a terminal. Press [ENTER] to move to the next setting. 3.8.3.3.
VIRDI 4000 TM User’s Manual 48 3.8.4. Wiegand output settings ◆ [*] [6] ‘084265’ [ENTER] [4] ◆ Wiegand Out:0 0=None 1=26bit 2=34bit Default setting: ‘0’ The default setting is ‘0’. If Wiegand output from the local terminal is needed for external access controller with Wiegand input, an administrator can set this setting as ‘1’ or ‘2’. - In case of ‘1’ setting, “site code [1 byte] and user ID [2 bytes]” are transmitted through Wiegand output port. User ID should be set as less than 4 digits.
VIRDI 4000 TM User’s Manual 49 3.8.5.1. User ID length settings ◆ [*] [6] ‘084265’ [ENTER] [5] ◆ (2-8):4 Default setting: ‘4’ digits This ID length can be 2~8 digits and should be the same as that of ID registered in the server program. If the ID registered in the server program is ‘000075’, input 6.
VIRDI 4000 TM User’s Manual 50 Initialize” and the following screen appears: 1. Init Config 2. Delete Log 3. Init Terminal To initialise configuration settings, press [1]. To initialise the record, press [2]. To factory default settings, press [3]. 3.8.6.1. Configuration settings initialisation ◆ [*] [6] ‘084265’ [ENTER] [6] [1] ◆ [ Y=1 / N=2 ] : To initialise configuration settings, press [1]. If not, press [2].
VIRDI 4000 TM User’s Manual 51 settings, users’ information and authentication records (log data) are deleted, which is factory default. ※ If this factory default initialisation is done, the language for voice output and display characters change to English. If you need to set as another language, refer to the following: “6. Set Device” “5. System Config” After this initialisation is successfully done, the terminal is rebooted with a “success” buzzer sound. 4. How to use the terminal 4.1.
VIRDI 4000 TM User’s Manual 52 - Password authentication After inputting the user ID, and changing the authentication mode by pressing the corresponding function key, input the password for authentication. - Card authentication after the following settings are done: menu “6.Device” settings “3.Card reader” is set to [1] or over Pressing the function key changes just the authentication mode.
VIRDI 4000 TM User’s Manual == == 53 00:00 00:00 Non-registered user ID. During the authentication request to the authentication server, a network problem occurred or the network was disconnected. 4.1.3. [1:N] fingerprint authentication This authentication is only allowed for users who are registered as 1:N authentication setting.
VIRDI 4000 TM User’s Manual == 54 00:00 During authentication request to the authentication server, a network problem occurred or the network was disconnected. ▶ In case of users who are registered as [fingerprint & password], the correct password input is required after successful fingerprint authentication. 4.1.4. Password authentication ▶ If the user ID is “0001”, input “0001” and press the function key. The terminal waits for the user password to be input after a “ppiriririck” buzzer sound.
VIRDI 4000 TM User’s Manual 55 4.1.5. Card authentication ▶ In case of a user who is registered as [RF], [RF|FP] or [RF|PW], place the card close to the terminal in main screen. After a “ppig” buzzer sound, the authentication result appears on the LCD. == 00:00 == 00:00 Place your card close to the terminal. It makes a “ppig” buzzer sound. ▼ If authentication is successful, a success message is displayed on the LCD together with a voice message “You are authorised”.
VIRDI 4000 TM User’s Manual 56 4.1.6. User ID group authentication User ID group authentication is performed from among users grouped with the same first digit and/or above user ID – at least one digit. This authentication can be conveniently used if there are lots of users and the matching time for 1:N authentication takes too long. In the menu set, as below: 3. Option settings 2. Authentication method settings <1:N authentication>=1 =1.
VIRDI 4000 TM User’s Manual 57 ▶ If the user ID is “0001”, input “1” or “0001” and press the function key. The light on the fingerprint input window turns on together with the voice message “Please enter your fingerprint.’’ - when auto sensing runs, fingerprint only input is sufficient for authentication. When a fingerprint is input, the authentication result is displayed on the LCD window. == 00:00 0001 If the user ID is ‘0001’, input ‘0001’ and press the function key.
VIRDI 4000 TM User’s Manual 58 == LEAVE 00:00 == OUT 00:00 == BACK 00:00 Leave mode; authentication with [F2] Outside work mode; authentication with [F3] Return mode; authentication with [F4] - Fingerprint authentication Press the function key which related to specific T & A mode. If the function key is not used, and authentication process is done in auto sensing, the current mode on the screen works for authentication.
VIRDI 4000 TM User’s Manual 59 - After setting Menu 3.Option 1.Application [1] T&A, set more than one key to ‘O’ in setting. The keys set to ‘X’ are not applied in this multi-key function. - As a mode is defined as a function key plus a number key, press a number key after pressing the function key for authentication. In the server program, authentication mode is displayed as a function key plus a number key like “F3+1”.
