User's Manual

Smart-i 사용자 가이드 10
㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050)
Tel : [phone] , Fax : [phone], E-Mail :[e-mail]
http://www.unioncomm.co.kr
3. Environment settings
3.1.Check items before setting the environment
3.1.1. Entering menu
▶ [Hold F4 down] Æ (Red & Green LED On) Menu Mode
If you hold [F4] key down longer than 4 seconds, you can enter menu mode.
When you enter menu mode, red and green LED on a terminal are on to classify
menu mode.
To change from menu mode to waiting authentication mode, press [F4] button, or
do not press any button longer than 10 sec so that it will automatically to change
to waiting authentication mode.
3.2. Menu Configuration
- [Fn~ long] means hold each function key down longer than 4 sec.
Menu Mode
[F4~ long]
Enroll a user
(Card)
[F1~ long]
Æ Flickering white LED for 5 sec Æ Swipe a card
(Buzzing sound + blue LED light on)
Enrolling a card is completed
(Buzzing sound + red LED light on)
Enrolling a card is failed
Delete a user
(Card)
[F3~ long]
Æ Flickering the white LED for 5 sec Æ Swipe a card
(Buzzer + blue LED light on)
Enrolling a card is completed.
(Buzzer + red LED light on)
Enrolling a card is failed.
4. How to use a terminal
4.1. Change to authentication mode
Start a shift [F1], End a shift [F2], Start a break [F3], or Return from a break [F4]
is pressed to change to correct authentication mode.