CAUTION: You must read this before you proceed CHAIR CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Label Description Qty A Backrest Panel 1 B Front Leg Panel 1 C Seat Panel 1 D Right Arm Panel 1 E Left Arm Panel 1 F Seat Cushion 1 Description Qty ① Allen Key 2 ② Screw (M6*35mm) 3 ③ Bolt (M6*45mm) 9 No.
Before Beginning Assembly: OVERVIEW Backrest Panel (A) Right Arm (D) Panel Seat Cushion (F) Left Arm Panel (E) Front Leg Panel (B) Seat Panel (C) FRONT FACING This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair the above picture to assemble to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Place Front Leg Panel (B) with its underside facing skywards onto a clean, soft surface to avoid any scratch or damage to the product. Attach Seat Panel (C) to Front Leg Panel (B) using 3 Bolts (③) and Allen Key (①). Do not fully tighten the Bolts. Step 3 Place Backrest Panel (A) with its underside facing skywards onto a clean, soft surface to avoid any scratch or damage to the product.
Step 4 4.2 B 4.1 With assistance from your adult partners, turn the chair in right side up. Position Right Arm Panel (D) and Left Arm Panel (E) onto the tenon of Front Leg Panel (B). 4.1) Secure Right Arm Panel (D) and Left Arm Panel (E) to Front Leg Panel (B) using 2 Screws (②) and Allen Key (①). 4.2) Attach Right Arm Panel (D) and Left Arm Panel (E) to Backrest Panel (A) using 2 Bolts (③) and Allen Key (①). Do not fully tighten Screws and Bolts.
Step 5 Stand the Chair up, with assistance from your adult partner. Exert pressure floorwards, onto the Chair with both your hands. This pressure will help the Legs and Chair reach full alignment status. Check for wobbles on a LEVEL surface. If no wobbles are found proceed to tighten Bolts and Screws in a sequential manner, until evenly secured. When tightening Bolts and Screws tighten sequentially. Do not tighten any Bolt and Screw fully and then move on towards the next one.
of 7
