CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly.
Label A Table Top 1 B 1st Legs 2 2nd Legs 2 C 2 D 3rd Legs E Side Support Bar 2 F Middle Support Bars 2 2 OF 10
Label Bolt (M6 x 20mm) Washers (M6/16 x 2mm) Screws (M6 x 30mm) Allen Key 21 45 25 1 x 21 x 25 x 45 3 OF 10
Middle Support Bars (F) 1st Leg (B) 2nd Leg (C) 3rd Legs (D) 3rd Leg (D) Side Support Bars (E) 1st Leg (B) This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the table, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
With the help from your partner 2.1: Place the Table Top (A) on one side as picture above. Slightly open the table top as the arrow. 2.2: Place the Table Top (A) with its underside skywards onto a clean, soft surface to avoid any scratches or damages to the product..
Step 3 4 3 A 3 2 3 2 3 2 2 F F Place Middle Support Bar (F) to the housings of Table Top (A), secure by using the Screw (③) , Washers(②) and Allen key (④), as shown in the picture. Do not fully tighten the Screws. Step 4 4 3 3 2 2 3 2 3 2 E A E Place Side Support Bar (E) to the housings of Table Top (A), secure by using the Screws (③) , Washers (②) and Allen Key (④), as shown in the picture. Do not fully tighten the Screws.
Step 5 D Hinge 2 1 2 1 4 E A Place the 3rd Leg (D) to the long side of Table Top (A) and Support Bar (E), secure by using the Bolts (①), Washers (②) and Allen Key (④) as shown in the picture. Do not fully tighten the Bolts. Note: the hinges on 3rd Leg (D) should face inside Step 6 C 1 2 4 2 E A 1 Place the 2nd Leg (C) to the long side of Table Top (A) and Support Bar (E), secure by using the Bolts (①), Washers (②) and Allen Key (④) as shown in the picture. Do not fully tighten the Bolts.
Step 7 2 D 1 2 1 4 C A C 1 2 4 2 1 D Repeat the same process in step 5 and step 6 with the other 2nd Leg (C) and 3rd Leg (D). Do not fully tighten the Bolts. Step 8 4 B C 3 2 D A D B C Attach the 1st Legs (B) to the short side of Table Top (A) using Screw (③) with Washers (②) and Allen Key (④), as show in picture above. Do not fully tighten the Screws.
Step 9 B C D D B 2 1 4 C Attach the 1st Legs (B) to the 3rd Legs (D) and 2nd Legs (C) using Bolts (①) with Washers (②) and Allen Key (④), as show in picture above. Do not fully tighten the Bolts. Step 10 With assistance from your adult parners, Turn the Table right side up. Inspect it and make sure all parts are adequately connected. Check to ensure there is NO WOBBLINESS. In a sequential manner, ensure all bolts and screws are fully locked into position and secured.
Care & Maintenance Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. ü To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. ü To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow , and direct sunshine.
