Installation & Assembly

The legs and hardware are located under the drawer

STEP2 PUT THE WASHERS (H2) ON THE ALLEN

BOLT (H1) IN THE ORDER SHOWN IN THE

PICTURE

STEP3 INSERT ALLEN BOLT WITH WASHER INTO

THE BOTTOM PANEL HOLE AS SHOWN AND

TIGHTEN WITH ALLEN KEY(H3).

STEP 4 PLACE THE MARBLE (C) GENTLY AS

SHOWN.

STEP1 OPEN THE ZIPPER ON THE INSIDE OF THE

DRAWER AND TAKE OUT LEGS AND HARDWARE

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and

hardware contents list.

If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 15minutes.

Tools Required for Assembly (included): Allen Key

PREPARATION