Assembly Instructions

ManualsBrandsUnion Rustic ManualsAll Patio TablesLoya Bar Table

Table Of Contents

Caution : You must read this before you proceed

BAR TABLE

CAUTION : This Bar Table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Bar Table and to prevent damage to the Bar Table, 02 people may

be needed to execute this action.

Page 1 of 7

Summary of content (7 pages)

PAGE 1
BAR TABLE Caution : You must read this before you proceed CAUTION : This Bar Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Bar Table and to prevent damage to the Bar Table, 02 people may be needed to execute this action.
PAGE 2
Label Description QTY A Table Top 1 B Legs 4 Description QTY Label Picture Picture j Bolt (M8x20mm) 13 k Flat Washer (M8.
PAGE 3
Before Beginning Assembly: Page 3 of 7
PAGE 4
Overview Table Top (A) Legs (B) Legs (B) FRONT This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 5
Step 2 A With the assistance of an adult, lay the Table top (A) facedown onto a clean, flat surface to avoid any scratches or damage to the product. Step 3    B A Insert one of legs (B) into the table top (A), put the flat washer (②) and bolt (①) as above picture. Affix leg (B) and table top (A) by using Allen key (③). Repeat the same process with the other 3 Legs (B) Do not fully tighten the Bolts.
PAGE 6
Step 4 With assistance from your partners, turn the Table back to normal flat ground EXERT pressure, floorwards, onto the Table. This pressure will help the Legs and Table Top reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts until evenly secured. Inspect the Table and make sure all parts are adequately connected. Your Table is ready for use. This Table can only be used on a flat, level surface.
PAGE 7
Page 7 of 7