Installation & Assembly

Adirondack Ottoman

Tools required:

For your convenience we use Recex multi-drive, rust-resistant, zinc-plated hardware.

Tools required are a #2 Philips or Robertson screwdriver and a ½ wrench.

Before Assembly:

Check all components of the package with the contents list to familiarize you with their placement,

and ensure no parts are missing.

Package Contents:

(a) Sides… 2

(b) Slats… 7

Hardware:

• 1 ½" Screw… 22

• 2 ½’ Carriage Bolt… 2

• Washer… 2

• Hex Nut… 2

Assembly

• Position the 2 sides approx. 20" apart - make parallel to each other with flat edge up.

• Attach a slat across beveled end of sides using 1-1/2" screws.

• Attach another slat across pointed ends of sides.

• Evenly space and attach the remaining slats between sides

• Fasten Legs to underside of ottoman using Bolts, Nuts and Washers.

(

Take care to keep finished side of leg facing outward.

)

• Level both legs before securing to underside of Ottoman with 1 ½" screws.

Thank you for choosing us.

♥ Visit our website for more great products

(Unassembled kit)