Installation & Assembly

ManualsBrandsUnion Rustic ManualsFour Person Patio Dining SetsHartt Square 4 - Person 35.5'' Long Dining Set

Table Of Contents

Caution: This Table is NOT a TOY

Keep your child/ children at bay during the assembly process.

Whenever moving/lifting the Table and to prevent damage to the Table, two

adults are needed to execute these actions.

Page 1 OF 6

TABLE

Caution: You must read this before you proceed

Please look underneath table top for hardware packs

Summary of content (6 pages)

PAGE 1
Caution: You must read this before you proceed Please look underneath table top for hardware packs TABLE Caution: This Table is NOT a TOY Keep your child/ children at bay during the assembly process. Whenever moving/lifting the Table and to prevent damage to the Table, two adults are needed to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Table Top 1 B First Leg Frame 1 C Second Leg Frame 1 D Third Leg Frame 1 Hardware Label Picture Description QTY 1 Long Bolt (M6x100 mm) 2 2 Screw (M6x20mm) 3 3 Short Bolt (M8x35 mm) 5 4 Allen Key 1 5 Leveler (M8X20mm) 5 Page 2 OF 6
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps OVERVIEW Table Top (A) Second Leg Frame (C) Third Leg Frame (D) First Leg Frame (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 1 4 2.1 B B C D D B C D 2.2 4 2 2.1) Insert Third Leg Frame (D) into First Leg Frame (B) as pictured. Attach Third Leg Frame (D) into First Leg Frame (B) by using Bolt (①) with Allen Key (④). 2.2) Insert Second Leg Frame (C) into First Leg Frame (B) and Third Leg Frame (D). Attach Second Leg Frame (C) to First Leg Frame (B) and Third Leg Frame (D) by using 2 Screws (②) with Allen Key (④).
PAGE 5
Step 3 3.1 3.2 5 4 3 B A D B B C A Wooden Dowel 3.1) Place Table Top (A) facedown onto a clean, non-marring surface to avoid any scratches or damage to the product. Position the Leg Frame onto Table Top (A) inserting Dowels on Leg Frame into Housings on Table Top (A). Attach Leg Frame to Table Top (A) by using Bolts (③) with Allen Key (④). 3.2) Attach Levelers (⑤) with the Legs, use hand rotate direction of the arrow. Tighten the Bolts fully in a sequential manner.
PAGE 6
Page 6 OF 6