Installation & Assembly

ManualsBrandsUnion Rustic Manuals3-4 Person Patio Conversation SetsEncinal Solid Wood 4 - Person Seating Group with Cushions

Assembly Instructions

Caution: You must read this before you proceed

Table

Caution: This Table is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Table and to prevent damage to the Table, two adults are

required to execute these actions.

Summary of content (5 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Table Caution: This Table is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Table and to prevent damage to the Table, two adults are required to execute these actions.
PAGE 2
Parts List Label Picture Description QTY A Table Top 1 B Leg 4 Description QTY ① Bolt (M6*50mm) 9 ② Washer 9 ③ Allen Key 2 Hardware Label Picture 2
PAGE 3
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
PAGE 4
Step 1 Unplace and place all parts on a clean, non-marring surface. Step 2 Attach Leg(B) to Table Top(A) using Bolts(①) and Washers(②) with Allen Key(③) as shown above. Repeat the same process with the remaining three Legs(B).
PAGE 5
Step 3 Place the Table onto a flat, level surface. Then EXERT pressure, floorwards onto the Table with both hands. This pressure will help the Table reach full alignment at all joints. In a sequential manner, gradually tighten all Bolts at all joints until evenly secured. Inspect the Table and make sure all parts are adequately connected. Your Table is ready for use. This Table can only be used on a flat, level surface.