Assembly Instructions Caution: You must read this before you proceed Sun Lounger CAUTION: This Sun Lounger is NOT a TOY. Keep your child / children at bay during the assembly process. Whenever lifting or moving the Sun Lounger and to prevent damage to the Sun Lounger, two adults may be needed to execute these actions.
Parts List Label Picture Description QTY A Left Seat Base Panel 1 B Right Seat Base Panel 1 C First Support Bar 2 D Second Support Bar 2 E Feet Block 2 F Feet Base Panel 2 G Seat Frame 3 H Left Backrest Frame 1 I Right Backrest Frame 1 J Middle Backrest frame 1 K Horizion Bar 1 L Verticle Bar 2 M Lower Backrest Panel 1 N Upper Backrest Panel 1 O Cushion 1 2
Hardware Label Picture Description QTY ① Screw (M6 X 30 mm) 7 ② Screw (M6 X 40 mm) 23 ③ Bolt (M6*50 mm) 3 ④ Flat Washer(Ø6/20 X 4 mm) 5 ⑤ Allen Key 2 Assembly Preparation Before Beginning Assembly: 3
Assembly Steps Overview Left Backrest Frame (H) Upper Backrest Panel (N) Lower Backrest Panel (M) Horizion Bar (K) Middle Backrest Frame (J) Left Seat Base Panel (A) Verticle Bar (L) Right Backrest Frame (I) Feet Block (E) Feet Base Panel (F) Left Seat Base Panel (B) Seat Frame (G) Second Support Bar (D) First Support Bar (C) Cushion (O) FRONT FACING This Sun Lounger has multiple parts and may require up to 30 minutes to assemble.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 Position the Second Support Bar (D), Feet Block (E ) and the Feet Base Panel (F ) to the Left Seat Base Panel (A ) and Right Seat Base Panel (B) using Screws (② ②) and (⑤) ⑤ as shown above Do not fully tighten the Screws Step 3 I N M J Place the Left Backrest Panel (H), Right Backrest Panel (I), Middle Backrest Panel (J) on a clean, nonmarring surface.
Step 4 K L Attach the Horizion Bar (K) and Vertical Bar (L) to the assemble in step 3 using Screws (②) ② and Allen Key (⑤) as shown above Do not fully tighten the Screws Step 5 Attach the assemble in step 4 to assemble in step 2 using Bolts (③ ③), Flat Washer (④) ④ and Allen Key (⑤) ⑤ as shown above Do not fully tighten the Bolts Step 6: With the help of your adult partner, turn back the assemble in step 5 and attach the First Support Bar (C ) to the frame as shown above 6
Step 7: Position the Seat Frame (G) to the assemble in step 6 as shown above Step 8: O Place the Cushion (O) to the Sun Lounger, then tie the velcro straps around Cushion (O) as pictured. as shown above Then EXERT pressure, floorwards onto the Sun Lounger with both hands. This pressure will help the Sun Lounger reach full alignment at all joints. In a sequential manner, gradually tighten all Bolts, Screws at all joints until evenly secured.
