Installation & Assembly

Attach the Pre-assembled in step 3 to Seat Panel (A) by using Bolts (①)

with Allen Key (⑨).

Do not fully tighten the Bolts.

Attach one of Wheel (F) to Back Leg Panel (B) by using Bolt (②), Washer

(⑤), Iron tube for Wheel (⑧), Washer (⑥) and Sleeve Nut (⑦) with

Allen Key (⑨) in sequence as shown on the picture above.

Then, repeat the same process of this step to attach the other Wheel (F)

to the remaining Back Leg Panel (B).

Do not fully tighten the Bolts.

Step 4

Step 5